Konica Minolta bizhub 40p manual Unit, Mea, Sure, Start, On/Off Con, Tinue

		PAPER	Settings	PLAIN PAPER/
		TYPE		RECYCLED/THICK 1/
				THICK 2/THICK 3/
				LABEL/TRANSPARENCY/
				ENVELOPE/POSTCARD/
				THIN PAPER
			Select the type of media that is normally
			used.
	PAPER	Settings	ENABLE/DISABLE
	SIZE
		If ENABLE is selected, a paper size error is detected.
	ERROR
		If DISABLE is selected, no paper size error is
		detected.
	UNIT	Settings	INCHES/MILLIMETERS
	OF
		The units for specifying the size of custom media can
	MEA-	be switched between inches and millimeters.
	SURE	" The default setting for North America is
		INCHES. The default setting for all other
		regions is MILLIMETERS.
STARTUP	DO	Settings	ON/OFF
OPTIONS	START-
		Select whether or not a startup page is printed when
	UP	the printer is turned on.
	PAGE
AUTO	Settings	ON/OFF
CON-
	Select whether or not printing continues if the size or type of
TINUE	media in the selected tray is different from the size or type of
	media for the print job.
	If AUTO CONTINUE is set to ON, printing automatically contin-
	ues after about 10 seconds under the following conditions. At
	this time, printing will be performed even if the media size is dif-
	ferent.
	No media: PAPER EMPTY (Page 186)/TRAY EMPTY (Page
	187)
	Different media size/type: PAPER ERROR (Page 186)/TRAY x
	PAPER ERR (Page 187)

70 Configuration Menu Overview