Konica Minolta bizhub 40p manual Status, Error, and Service Messages

This message...	means...	do this...
OUTPUT FULL	The output tray is full	Remove all media from
REMOVE PAPER	of media.	the output tray.
YYYY
PAPER EMPTY	The specified tray is	Load the correct media
“SIZE”	empty. (Appears	into the specified tray.
“MEDIA”	when PAPER
	MENU/PAPER
	SOURCE/TRAY
	CHAINING ON is
	set.)
PAPER ERROR	The media size/type	Load the correct media
“SIZE”	set in the printer	size and type.
“MEDIA”	driver is different from
	the size/type of media
	loaded (Appears
	when PAPER
	MENU/PAPER
	SOURCE/TRAY
	CHAINING ON is
	set.)
PAPER JAM	Media has misfed in	Press the key to dis-
DUPLEX1	the duplex option.
		play the help screen.
PAPER JAM	Media has misfed in	Follow the instructions in
DUPLEX2	the duplex option.	the help screen to
		remove the misfed
PAPER JAM	Media has misfed
		media.
FUSER/EXIT	leaving the fuser
	area.
PAPER JAM	Media has misfed in
SUB EXIT	the feed section of the
	sub output tray.
PAPER JAM	Media has misfed
TRAYX	while being pulled
	from the specified tray
	(Tray 1, 2, 3, or 4).
PAPER JAM	Media has misfed in
TRANSFER	the transfer section.
TONER OUT	The toner cartridge is	Replace the toner car-
REPLACE TONER	completely empty.	tridge.

186 Status, Error, and Service Messages