Konica Minolta bizhub 40p Hold, Energy, Saver, Menu, Lcd, Trast, Secu Change, Rity Pass, Word

HOLD	Settings	DISABLE/1 hour/4 hours/1 day/
JOB		1 week
TIME
	Specify the length of time until print jobs saved on the hard disk
OUT	are deleted. If DISABLE is selected, print jobs are not deleted
	at a specific time.
ENERGY	Settings	5 minutes/6 minutes/7 minutes/8
SAVER		minutes/9 minutes/10 minutes/11
TIME		minutes/12 minutes/13 minutes/14
		minutes/15 minutes/30 minutes/1
		hour
	Specify the length of time until the machine enters Energy
	Saver mode.
MENU	Settings	OFF/1 minute/2 minutes
TIME
	Specify the length of time until the status screen is displayed
OUT	when no operation is performed while a menu or help screen is
	displayed in the message window. If OFF is selected, no
	timeout occurs.
LCD	Settings	-3/-2/-1/0/+1/+2/+3
CON-
	Adjust the contrast of the message window.
TRAST	The darkest level setting is -3and the brightest level setting is
	+3.
SECU-	CHANGE	Specify the password for locking the control panel.
RITY	PASS-	If the password is set to 0000 (default), the control
	WORD	panel is not locked. In order to lock the control panel,
		be sure to specify a password other than 0000.
	LOCK	Settings	OFF/MINIMUM/ON
	PANEL
		Specify how the control panel is locked.
		If OFF is selected, the control panel is not locked.
		If MINIMUM is selected, the INTERFACE MENU
		and SYS DEFAULT MENU are protected with a
		password.
		If ON is selected, all menus are protected with a
		password.
		In order to lock the control panel, be sure to specify a
		password other than 0000.

Configuration Menu Overview 71