Reconnect all interface cables.
Reinstall the panel and tighten the two screws.

7 Mount the CF Adapter onto the controller board as shown in the figure, and then secure the screws.

8 Fully insert the CompactFlash card into the appropriate slot. When the CompactFlash card is correctly inserted, the button on the side of the slot (circled in the illustration) slightly pops out.

" Before removing the Com- pactFlash card, press this button.

9

10 Attach the right side cover.

11

12 Reconnect the power cord, and turn on the printer.

CompactFlash

203

Page 213
Image 213
Konica Minolta bizhub 40p manual CompactFlash 203