Konica Minolta bizhub 40p manual Transparencies, Use transparencies that are

Transparencies

"

"

"

Do not fan transparencies before loading them. Resulting static elec- tricity may cause printing errors.

If you touch the face of the transparencies with your bare hands, print quality may be affected.

Keep the printer path clean. Transparencies are especially sensitive to a dirty media path. If there are shadows on either the top or the bottom of the sheets, see chapter 8, “Maintaining the Printer” .

" Remove transparencies as soon as possible from the output tray to avoid static buildup.

You can print continuously with transparencies. However, this could affect the media feed, depending on the media quality, static buildup, and printing envi- ronment.

Try printing your data on a sheet of plain paper first to check placement.

" If you have problems feeding 100 sheets, try loading only 1–50 sheets at a time. Loading a large number of transparencies at one time may cause static buildup, thus causing feeding problems.

Capacity	Tray 1	Up to 100 transparencies, depending on
		their thickness
	Tray 2/3/4	Up to 100 transparencies, depending on
		their thickness.
Orientation	Face up
Driver	Transparency
Media Type
Duplexing	Not supported

" Always first test a small quantity of a particular type of transparency.

Use transparencies that are

„Approved for laser printing

DO NOT use transparencies that

„Have static electricity that will cause them to stick together

„Are specified for inkjet printers only

Media Types 91