DUPLEX Settings | OFF/LONG EDGE/SHORT EDGE | |
|
|
|
If LONG EDGE is selected, the pages will be printed on both sides of the paper for
If SHORT EDGE is selected, the pages will be printed on both sides of the paper for
The setting specified in the printer driver will override this menu setting.
COPIES Settings |
| |
|
|
|
Specify the number of copies to be printed.
The setting specified in the printer driver will override this menu setting.
COLLATE Settings | ON/OFF | |
|
|
|
If ON is selected, all pages of the document are printed before the next copy is printed.
If OFF is selected, all copies of the document are not printed separately.
The setting specified in the printer driver will override this menu setting.
" This menu item appears only if an optional hard disk kit or a CompactFlash card of 1 GB or more is installed.
FIN- Settings SUB TRAY/MAIN TRAY/OFFSET
ISHING When SUB TRAY is selected, the paper is fed to the sub output tray.
When MAIN TRAY is selected, the paper is fed to the main out- put tray.
When OFFSET is selected, the paper is fed to the sub output tray with each copy slightly shifted.
The setting specified in the printer driver will override this menu setting.
" The paper size available for SUB TRAY or OFFSET is as follows:
Width: 89 to 216 mm (3.5 to 8.5 inches)
Length: 140 to 356 mm (5.5 to 14.0 inches)
" OFFSET can be set only when COLLATE is ON.
Configuration Menu Overview | 47 |
