Konica Minolta bizhub 40p manual Duplexing, 108

Duplexing

Select paper with high opacity for duplex (double-sided) printing. Opacity refers to how effectively paper blocks out what is written on the opposite side of the page. If the paper has low opacity (high translucency), then the printed data from one side of the page will show through to the other side. Check your application for margin information. For best results, print a small quantity to make sure the opacity is acceptable.

Duplex (double-sided) printing can be done manually or can be done auto- matically with the duplex option installed and selected. For installing the duplex, refer to “Installing the Duplex” on page 205.

Note

For details on supported media types for duplex printing, see “Media Specifications” on page 84.

Duplexing envelopes, labels, thick paper3 or transparencies is not supported.

" Duplex printing can be performed with enough memory (no less than 256 MB) installed in the printer.

How do I autoduplex?

You should verify that the duplex is physically installed on the printer to suc- cessfully duplex (double-sided) the job.

Check your application to determine how to set your margins for duplex (double-sided) printing.

The following Binding Position settings are available.

1

2 1 3

1

2

If “Short Edge” is selected, the pages will be laid out to flip at the top.

If “Long Edge” is selected, the pages will be laid out to flip at the side.

1 3

108 Duplexing