Konica Minolta bizhub 40p manual Installing the Lower Feeder Unit, Lower Feeder Unit 209

Installing the Lower Feeder Unit

Note

Since consumables are installed in the printer, be sure to keep the printer level when moving it in order to prevent accidental spills.

1 Turn off the printer and discon- nect the power cord and inter- face cables.

2 Place the feeder unit to be installed at the lower level on a flat location.

" If you install only one lower feeder unit, proceed to Step 6.

3 Lift up the feeder unit to be installed at the higher level by holding the parts as shown in the figure.

Lower Feeder Unit 209