Konica Minolta bizhub 40p manual Left, Adjust ADJ, Ment TRAY1, Power, Video, Lag, SUP Fuser, Quick

	LEFT	LEFT	Settings	-8-0-7
	ADJUST	ADJ
			When printing on media in Tray 1, specify
	MENT	TRAY1	the size of the left margin.
		LEFT	Settings	-8-0-7
		ADJ
			When printing on media in Tray 2, specify
		TRAY2	the size of the left margin.
		LEFT	Settings	-8-0-7
		ADJ
			When printing on media in Tray 3, specify
		TRAY3	the size of the left margin.
		LEFT	Settings	-8-0-7
		ADJ
			When printing on media in Tray 4, specify
		TRAY4	the size of the left margin.
		LEFT	Settings	-8-0-7
		ADJ
			When printing on media using duplex
		DUPLEX	pass, specify the size of the left margin.
	LD	Settings	0-7
	POWER
		Adjust the intensity of laser output.
	VIDEO	Settings	0-15
	TIME
		When resolution is set to 1200 dpi, adjust the video
	LAG	output start point horizontally in the even lines.
SUP-	RE-	FUSER	Settings	YES/NO
PLIES	PLACE	UNIT
			Reset the service life counter for the
			fuser unit.
QUICK	UP-	Setup	EXECUTE/CANCEL
SET-	DATE
		Select whether or not to update the printer settings
TING	SET-	from the definitions file on the USB memory device.
	TING	If EXECUTE is selected, the printer settings are
		updated.
		If CANCEL is selected, the settings are not updated.
	BACKUP	Setup	EXECUTE/CANCEL
	SET-
		Select whether or not to save the printer settings
	TING	information on a USB memory device.
		If EXECUTE is selected, the printer settings are
		saved on a USB memory device.
		If CANCEL is selected, the settings are not saved.

76 Configuration Menu Overview