Others

Optional accessories

Some optional accessories may not be available in some countries.

About the Suction Cup Mount/ the Video Camera Mount (For Handlebar)

You can attach the Suction Cup Mount (VW-SCA100) as follows.

For information on how to mount the Video Camera Mount (For Handlebar) RP-CMC10PP, refer to the operating instructions for it.

When attaching the Suction Cup Mount

1 Align tripod receptacle A of this unit

with camera screw B of the suction cup

 

mount.

 

2Turn camera lock dial C of the Suction Cup Mount in the direction of the arrow

(the LOCK side) to lock it.

Hold this unit with your fingers to prevent it from turning with the dial.

U

NLOCK

LOCK

When removing the Suction Cup Mount

To remove the suction cup mount, perform the steps for mounting it in reverse order.

The screen may shake during recording. We recommend that you record an image as follows: j Close the LCD monitor during recording (The recording will continue)

j Set the zoom magnification to k1 j [E.I.S.] is set to [ON] (l41)

Depending on recording conditions, even if you record the image as described above, the screen may shake.

If you experience fatigue, a feeling of discomfort or other symptoms when playing back a scene recorded with the Suction Cup Mount/Video Camera Mount (For Handlebar), stop the playback.

- 99 -

Page 99
Image 99
Panasonic HC-V130 Optional accessories, When attaching the Suction Cup Mount, When removing the Suction Cup Mount