Panasonic HC-V130 owner manual Close the LCD monitor, Setup # Quick Start # on

[QUICK START]

This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.

≥When in Quick Start Standby Mode about 60% of the power used in recording pause mode is being consumed, so the recording time will be reduced.

≥Quick Start will not work if there is no SD card inserted.

≥Change the mode to .

1Select the menu.

: [SETUP] # [QUICK START] # [ON]

2Close the LCD monitor.

The status indicator A flashes green and the unit goes into Quick Start Standby Mode.

3Open the LCD monitor.

The status indicator A lights red and the unit is put into recording pause.





≥Quick Start Standby Mode is canceled if j about 5 minutes have elapsed

j mode is set to

≥It may take some time for Automatic White Balance to adjust.

≥In the Quick Start Mode, the zoom magnification becomes approx. 1k.

≥When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)] (l29)/[ECONOMY (AC)] (l29), close the LCD monitor once and open it again.

≥Turn the unit off using the power button.

- 30 -