Panasonic HC-V130 Horizontally, Another device, it is not, Recognized, Viera Link does not work

	With other products
Problem	Check points
Although this unit is	≥ Please read the operating instructions of your TV and select
correctly connected to a	the channel that matches the input used for the connection.
TV, images cannot be	≥ Change the [TV ASPECT] setting to match the aspect ratio of
seen.	the TV. (l62)

≥When connecting the device to a television, the television

The images are squeezed image will not be displayed in the following cases. Use the

horizontally.	device's LCD monitor.
	j Recording video
	j When setting PRE-REC
If the SD card is inserted in ≥ Check that the device is compatible with the capacity or type
another device, it is not	of SD card (SD Memory Card/SDHC Memory Card/SDXC
recognized.	Memory Card) that you inserted. Refer to the operating
	instructions of the device for details.
VIERA Link does not work.	(Setting on this unit)
	≥ Connect with a HDMI mini cable. (supplied or optional)*
	(l61)
	≥ Set [VIERA Link] to [ON]. (l64)
	≥ Turn the unit off and then back on again.
	* Use the HDMI mini cable that comes with this unit if supplied.
	If it does not come with a HDMI mini cable, use a genuine
	Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30:
	optional). Check the accessories in the basic owner’s manual.
	(Setting on other devices)
	≥ If the TV input does not switch automatically, switch the input
	using the TV remote control.
	≥ Check the VIERA Link setting on the connected device.
	≥ Please refer to the operating instructions of the connected
	device.
Cannot copy scenes on	≥ Other equipment might have not recognized the SD card.
the SD card by connecting	Unplug the USB cable once, and reconnect it.
to other equipment with
the USB cable.

	With a PC
Problem	Check points
When connected by the	≥ After removing the USB cable, turn the unit on and connect
USB cable and charging	the cable again. The unit will be recognized by the PC. To
the battery, an error	charge the battery, after safely removing the USB cable, turn
message will appear on	the unit off and connect the USB cable again.
the PC.

- 91 -