Panasonic HC-V130 owner manual Face Framing, Auto Slow Shtr, Wind CUT, Prioritized face framing

[FACE FRAMING]

Detected faces appear with frames.

: [RECORD SETUP] # [FACE FRAMING] # desired setting

[PRIMARY]:

Only the prioritized face framing is displayed.

[ALL]:

All face detection framings are displayed.

[OFF]:

Cancel the setting.

≥Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen take preference over others.

∫Prioritized face framing

Prioritized face framing is displayed as orange frames. Focus and adjustment of brightness will be performed against the prioritized face framing.

≥The prioritized face frame is displayed only with Portrait Mode in the Intelligent Auto Mode.

≥The white frame is for face detection only.

[AUTO SLOW SHTR]

You can record bright pictures even in dark places by slowing the shutter speed.

≥Switch to Manual Mode. (l47)

: [RECORD SETUP] # [AUTO SLOW SHTR] # [ON]

≥The shutter speed is set to 1/30 or more depending on the surrounding brightness.

≥When the shutter speed becomes 1/30, the screen may be seen as if frames are missed and afterimages may appear.

[WIND CUT]

This is for reducing the wind noise coming into the built-in microphones.

≥Switch to Manual Mode. (l47)

: [RECORD SETUP] # [WIND CUT] # [ON]

≥This function’s default setting is [ON].

≥When switching to Intelligent Auto Mode, [WIND CUT] is set to [ON], and the setting cannot be changed.

≥You may not see the full effect depending on the recording conditions.

- 45 -