Toshiba e-STUDIO230/280 manual 220, RFC related Error Code Cause & Message Corrective Action

12.ERROR CODE (Cont.)

RFC related

	Error Code	Cause & Message	Corrective Action
	2500	Syntax error, command unrecognized:	Check if the Terminal mail address and
		HOST NAME error, Destination mail	Destination mail address are correct. Check if
		address error, Terminal mail address	the mail server is operating properly. Turn the
		error	power OFF and then back ON. Perform the job
			in error again.
	2501	Syntax error in parameters or arguments:	Check if the Terminal mail address and
		HOST NAME error, Destination mail	Destination mail address are correct. Check if
		address error, Terminal mail address	the mail server is operating properly. Turn the
		error	power OFF and then back ON. Perform the job
			in error again.
	2503	Destination mail address error	Check if the mail server is operating properly.
			Turn the power OFF and then back ON.
			Perform the job in error again. If the error still
			occurs, Contact your service representative.
	2504	HOST NAME error	Check if the mail server is operating properly.
			Turn the power OFF and then back ON.
			Perform the job in error again. If the error still
			occurs, Contact your service representative.
	2550	Destination mail address error	Check the state of the mail box in the mail
			server.
9	2551	Destination mail address error	Check if the mail server is operating properly.
			Turn the power OFF and the back ON.
			Perform the job in error again. If the error still
			occurs, Contact your service representative.
	2552	Terminal/Destination mail address error	Turn the power OFF and the back ON.
			Perform the job in error again. If the error still
			occurs, Contact your service representative.
	2553	Destination mail address error	Check if there is an illegal character in the mail
			box in the mail server.

220 9.JOB STATUS