Toshiba e-STUDIO230/280 manual 218

12.ERROR CODE (Cont.)

	Error Code	Cause & Message	Corrective Action
	2B31	Failed to access Electronic Filing.	Make sure that the specified e-Filing or folder
			exists. (If not, this error would not occur.).
			Delete the specified e-Filing or folder and
			reset them. Retry the job in error. If the
			specified e-Filing or folder cannot be deleted,
			contact your service representative.
	2B32	Failed to print Electronic Filing document.	Make sure that the specified document exists.
			(If not, this error would not occur.). Delete the
			specified document. Retry the job in error. If
			the specified document cannot be deleted,
			contact your service representative.
	2B50	Failed to process image.	Turn the power OFF and then back ON. Retry
			the scan. If the error still occurs, contact your
			service representative.
	2B51	Failed to process print image.	Make sure that the Function List can be
			printed out. Retry the print. If the error still
			occurs, contact your service representative.
	2B60	Duplicate error. Changed folder name	There is the same named folder in the
		automatically.	selected box. The system automatically
			renames the folder.
	2B70	Duplicate error. Changed document	There is the same named document in the
9		name automatically.	selected box or folder. The system
			automatically renames the document.
	2B90	Insufficient Memory.	Turn the power OFF and then back ON. Retry
			the scan. If the error still occurs, contact your
			service representative.
	2BA0	Invalid Box password specified.	Make sure that the password is correct and
			retry the scan, or reset the password and retry
			the scan. When this error occurs for the print
			of the data in the e-Filing, perform the print
			with the administrator's password. If the
			recovery is still not completed or in case of
			invalid password for the operation other than
			printing (opening the file, etc.), contact your
			service representative.
	2BB0	Job canceled	(Job was canceled by the user.)
	2BB1	Power failure occurred	Make sure that the power cable is connected
			properly and it is inserted securely.
	2BC0	System fatal error.	Turn the power OFF and then back ON. Retry
			the print. If the error still occurs, contact your
			service representative.

218 9.JOB STATUS