Toshiba e-STUDIO230/280 manual 217

Error Code	Cause & Message	Corrective Action
2D32	Failed to delete file	Turn the power OFF and then back ON. Retry
		the scan.
2D40	Failed to convert image file format	Turn the power OFF and then back ON. Retry
		the scan. If the error still occurs, contact your
		service representative.
2D60	Failed to copy file	Turn the power OFF and then back ON. Retry
		the scan. If the error still occurs, contact your
		service representative.
2D62	Failed to connect to network destination.	Make sure that the network path is correct,
	Check destination path.	and retry the scan. If the error still occurs, ask
		your administrator to confirm whether the IP
		address or path of the server is correct. Also
		make sure that the server is operating
		properly.
2D63	Specified network path is invalid. Check	Make sure you specify correct network folder
	destination path.	and retry the scan.
2D64	Logon to file server failed. Check	Make sure you specify correct user name and
	username and password.	password to logon the file server and retry the
		scan.
2D66	Failed to process your job. Insufficient	Delete the data in the local shared folder in the
	disc space.	equipment and retry the scan.
2D67	FTP service is not available.	Ask your administrator whether the FTP	9
		service is configured correctly.
2D68	File Sharing service is not available.	Ask your administrator whether the SMB
		protocol is enabled.
2DC0	Job canceled	Job was canceled.
2DC1	Power failure occurred	Make sure that the power cable is connected
		properly and it is inserted securely. Resend
		the job.
Store to e-Filing
2B10	There was no applicable job.	Retry the scan.
2B11	Job status failed.	Retry the scan. The system could not store the
		scan job.
2B20	Failed to access file.	Retry the scan. The system could not store the
		scan job.
2B30	Insufficient disc space.	Delete unnecessary documents in e-Filing and
		try again.

217