Toshiba e-STUDIO230/280 manual General Copying Procedures, Initial default Settings

2. GENERAL COPYING PROCEDURES

After placing or confirming paper in the drawers, place the originals. When the [START] button is pressed with any settings unchanged, copies are made in the initial (default) settings. You can make copies as desired by setting different copy modes.

2

Initial (default) Settings

The copy modes that are automatically set when the power is turned on, when the energy-saving mode is cleared or when the [FUNCTION CLEAR] button is pressed on the control panel are called the initial (default) settings. The initial setting when installing the equipment is as follows:

* The initial setting can be changed. See the [User Functions Guide] for details.

Item	Initial (default) setting
Reproduction ratio	100%
Copy quantity	1
Paper selection	Automatic paper selection
Original Copy	1-sided 1 sided
Exposure	Auto Exposure
Image quality	TEXT/PHOTO mode
Finishing mode	Placing original on the original glass:
	Non-sort/non-staple mode
	Placing the reversing automatic document feeder
	(optional): Sort mode
Installing the reversing automatic document feeder	Continuous original feed mode
(optional):

Copying Procedure

1 Place paper in the drawer(s).

-	"Changing the Paper Size of the Drawer"	Page 39
-	"Acceptable Copy Paper Types and Sizes"	Page 36

When the desired paper is not placed in any of the drawers or the large capacity feeder:

- Setting the drawer "Changing the Paper Size of the Drawer/ Setting the Drawer for Special Uses" Page 39

- "6.BYPASS COPYING" Page 61

54 2.HOW TO MAKE COPIES