Toshiba e-STUDIO230/280 manual Adjust the side guides with both hands

4.SETTING COPY PAPER (Cont.)

14 While pushing the size selection lever in the direction of the arrow, set the side guide to the desired paper size (indicated on the bottom inner surface of the drawer).

- Adjust the side guides with both hands.

5 Push the arrow part (left side) to lock the size selection lever.

6 Place paper in the drawer(s).

-Place paper face up.

-Maximum number of sheets that can be set. "Acceptable Copy

Paper Types and Sizes" Page 36

-Fan the paper well before placing it in the drawer.

-Do not add paper above the line indicated on the guide.

-Do not use creased, folded, wrinkled or damp sheets of paper.

Make sure that a gap of approx. 0.5 mm (less than 1 mm in total) is left between the paper and the side guide. If there is no gap, this could cause paper misfeeding.

7 Push the drawer straight into the copier until it comes to a stop.

- Be sure to push the drawer fully in.

Be careful not to let your fingers be caught when closing the drawer. This could injure you.

0.5mm

(0.02'')

40 1.BEFORE USING EQUIPMENT