Toshiba e-STUDIO230/280 specs

Caution

-DO NOT tilt the multifunctional digital systems more than 10 degrees when moving it. If it falls, this could result in personal injury.

-Avoid placing the multifunctional digital systems in a place unsuitable for its weight and also make sure the surface is level.

Remember that if the multifunctional digital systems falls over, serious injuries could result. Weight of the multifunctional digital systems: approx. 83 kg

-There are 4 adjusters (stoppers) on both sides (2 adjusters each) and 2 safety stoppers in front at the bottom of the paper feed pedestal and the large capacity feeder. After moving and installing the equipment, be sure to turn the adjusters clockwise to fix them firmly on the floor as shown in the illustration. Then fix the safety stoppers in the same way.

If they are not adjusted correctly and the equipment falls, this could result in personal injury To move the equipment, turn the safety stoppers and the adjusters anticlockwise.

- When connecting the optional equipment and interface cable to the multifunctional digital systems, be sure to turn the power OFF. If the power is not turned off, you could get an electric shock.

To turn the power OFF, see "Turning off the Power (Shutting down)"

Page 31.

11

Image 13

Toshiba e-STUDIO230/280 manual

Contents

Page EPA Energy Star MFD Table of Contents Table of Contents 233 Filing 221251 285Page Machine Noise Information Toshiba Quality is Second to None Toner Supplies/PartsGeneral Preface AdviceTip Features of the e-STUDIO230/280 When Installing or Moving General PrecautionsPage 10cm 10cm80cm Other Points When Using the Multifunctional Digital Systems Other Points During Maintenance or Inspection When Handling Supplies Disclaimer Notice Disclaimer Notice Before Using 1 Equipment Main Components Description of Each Component Key copy counter MU-8, MU-10 Optional EquipmentOffset tray MJ-5005 Job separator MJ-5004 Additional drawer module MY-1021 Paper feed pedestal KD-1011Saddle-stitch finisher MJ-1025 Single-staple finisher MJ-1022 Control Panel Error lamp Access buttonPrint DATA/MEMORY RX/FAX communication Interrupt button When Fixing the Angle of the Control Panel Angle of the control panel is fixed at 7 degrees Touch Panel Function setting areaMessage Display Touch-buttons Settings set functions confirmation button Clearing the Functions Selected Touch Panel Contrast Adjustment VolumeAutomatic Function Clear Enter Setting Letters Turning off the Power Shutting down Turning on the Power SwitchAbout 25 seconds later, the equipment Will be ready Press the User Functions button on the control panel Turning on the Power Switch Key in a registered department code 5- digit Controlling the Use of the Copier with Department Codes Do not pull out the key copy counter during copying Switching to the ENERGY-SAVING Mode Acceptable Copy Paper Types and Sizes Setting Copy PaperFeeder Paper Type Paper Size Maximum sheet capacity OHPPage Handling and Storing Paper Paper Type Toshiba Recommendation Paper Weight3478/ZWECK-AVERY Page Adjust the side guides with both hands Page Press the User Functions button on Control panel Place paper face up in the drawersPage Setting Copy Paper Page Set paper aligned in tray a and tray B HOW to Make Copies Acceptable Original Types and Sizes Setting OriginalsMaximum Number of Sheets that can be Stored Page Setting Originals Page Continuous Feed Mode Inside the Single-feed Mode Initial default Settings General Copying ProceduresCopying Procedure Place paper in the drawers Select the copy modes as required Place the originalsPress the Start button Place the next original, and press the Start button When Coming Across the Situations below Setting Auto Job Start Auto JOB Start JOB PresetPlace the originals Select the copy mode Canceling auto job start Confirming and Canceling Auto Job Start Press the Interrupt button Interrupt CopyingReplace the original with a new one Stopping the Copy Operation Bypass Copying Bypass Copying Bypass Copying See Setting the Other Size button Press the Start button Bypass Copying on Non-Standard-Size Paper Press the Start button Storing a Non-Standard Size in Memory COM10 Before copying on an envelopeCHO-3 YOU-4 Copying on an envelope Align the side guide to the envelope Place the envelopes on the bypass traySize Place the original on the original glass 10Press the Start button HOW to Make Copies Setting of Basic Copy Modes Automatic Paper Selection APS Paper Selection Press the Start button Press the Start button Setting the Other Size button Setting the Mixed Original Size To make duplex copying, select the automatic magnification Reduction and Enlargement Copying Press the AMS button Reduction and Enlargement Copying Press the Start button Selecting Finishing Modes Type of Finishing ModeFinishing Modes and Finishers Optional MJ-1025 MJ-1022 Names of each Finisher Optional MJ-5004 MJ-5005 Names of each Inner Finisher Optional Place Sort/Group CopyingPress the Sort or Group button Rotate Sort Mode Staple Sorting Setting Staple Sort Mode Place paper in the drawersExample of selecting the Front STAPLE-1 button A3, B4, FOLIO, LD, LG, FOLIO, Comp Maximum Number of Sheets that can be StapledA3, FOLIO, LD, Comp Magazine Sort & Saddle Stitch Mode Booklet Mode Set the paper size LT-R Available Conditions for Saddle Stitch Hole Punch Mode Optional LD, LG, LT, LT-R, Comp For Making 1-sided, 2-sided and Book-type Copies Duplex Copying Press the Start button Sided Originals 2-Sided Copies On the basic menu, press the highlighted button on the right Sided Originals 2-Sided Copies Place paper in the drawers Sided Originals 1-Sided Copies Press the 2 2 Duplex button Book-type Originals to 2-Sided Copies 100 101 102 Original Mode 103 Copy Density AdjustmentAutomatic Copy Density Modes Press the Auto button 104 105 Image Editing and Image Adjustment 106 Background Adjustment 107 108 109 Using the Editing Functions 110 Press the Start button Creating a Bookbinding Margin 111 112 113 Edge Erase 114 Book Centre Erase 115 DUAL-PAGEIf you need a binding margin, set the right or left margin 116 117 1/4 Select the type of the original 118 119 Magazine Sort from the Editing MenuSelect the paper type Example of copying a 12-page document Enter button 120 121 Image EditingTrimming/Masking 122 Mirror Image 123 Negative/Positive Reversal 124 125 Y Zoom 126 Cover Copying Place paper other than cover paper in the drawers 127 128 129 Sheet Insertion Mode Press Copied or Blank button 130Than 3 digits for insertion and press SET button 131 Time & Date Stamp 132 Numbering Key in the starting page number 133 134 JOB BuildPlace the originals of the 1st job 135 136 137 138 Direction of Copy Images in 1 to 2 and 2 to 139 Pressmenu.the 2 2 Duplex in the basic 140 CONTINUOUS/SINGLE Original Feeding Continuous Feed Mode Place paper in the drawers141 Press the ADF button Press the Sadf button 142 143 Storing Originals 144 Store to e-FILING Press the BOX/FOLDER button 145 12Press the Function Clear button to finish this job 146 147 Copy & File Select the desired location 148Select the desired file format 149 150 151 Scanning the Images Scanning Procedure Place the originals Scan Setting in the Touch PanelSelect the desired scan mode and press the button 152 153 154 Scan to e-FILING 155 156 10Press the SCAN! button 157 158 Scan to File Select the file format 159 Press the Enter button Press the SCAN! button 160 161 162 Scan to E-MAIL Press the E-MAIL to button and select the address 163 Press the Body button and enter the text body, etc 164Press the File Name button and name the scanned data Press the Edit button and set the original size and type 16510Set the size of the attached data 166 167 Internet FAX Internet FAX Precaution for Internet Transmission168 Internet Fax Transmission Overview 169 Sending Internet FAX Setting the Transmission Conditions170 171 172 173 174 175 176 177 178 179 180 Searching Address Using Ldap ServerPresspanel. the FAX button on the control Multi-address Transmission 181 Specify the recipient 182Confirming the Destinations Press the Destination button 183 Advanced Function 184Sending 2-sided Originals Press the Start button Priority Transmission 185 186 When SMTP* is selected for Receive Mode When POP3* is selected for the Receive ModeReceiving Internet FAX 187 Receiving from POP3 Server 188Checking completes Receiving from Smtp Server 189 JOB Status 190 JOB Status 191 Print JOB List 192 193 194 Proof Print JOB 195 196 Private Print JOB 197 198 When Using the Department Codes 199 200 Confirming the Status of FAX/INTERNET FAX JOB 201 Confirming the Status of Scan 202 LOG ListPrint Log Send/Receive Log 203 Scan Log 204 205 Address Registration from LOG Lists 206 207 Printing SEND/RECEIVE LOG List of FAX Status Releasing the Print Error208 Change the paper size of the drawer to the specified size 209 210 Error Code 211 Error Code Cause & Message Corrective Action 212 Smtp server connection error 213 214 215 Scan Job Error Code Cause & Message Corrective Action 216 217 218 219 Printer Error Code Cause & Message Corrective Action 220 RFC related Error Code Cause & Message Corrective Action 221 Filing Filing Functions Documents efficiently 223 Setting UP BOX 225 Changing Input Data Change the data of the BOX Name and the Password 227 Deleting BOX 229 Printing Stored DocumentPrint the whole Document Select the document to be printed Execute Test Printing Press the Print button 231 Printing the Stored Document with Added/Changed SettingsPerform steps 1 to 4 of the Print the whole Document Press the Settings button Set printing as required 233 Template Template 235 Recalling Template Recalling Template 237 Public Template Group Registering TemplateUser Group 239 Registering the Template in the User Group Press the Save button Enter the data for registering the new user group 241Press the empty Template button, Then press the Save button 10Press the Save button Enter the data requested 243 Press the button of Name 1, Name 2 and/or User Name Changing the Data of User Group 245 11 7 Press the Enter button Press the Name button and/or the User Name button 247 Deleting Template Deleting Template 249 250 11.TEMPLATE 251 When the Graphic Symbols Blink on the Touch Panel 252 Saddle Stitching Unit Misfeed symbol Replace Toner Cartridge symbolFINISHER/HOLE Punch Unit Misfeed symbol Call Service symbol 254 Replace Toner Cartridge Symbol 255 256 257 Additional Explanation 258 259 Clear Paper SymbolRotate the green knob to remove any misfed originals 260 261 262 Open the cover Remove any misfed paper Close the cover 263 264 265 266 267 268 269 270 271 Rotate the knob in the lower right clockwise 272 273 Adding Staples Optional 274 275 276 277 278 Removing Jammed Staples Optional 279 280 281 282 Disposing of the Punched Paper Bits Optional Periodic Maintenance Message Call Service Symbol283 284 285 Maintenance Power ON/OFF status Weekly MaintenanceDaily Inspection Items for Daily Check Open the front cover Clean the charger Cleaning the Charger287 Display does not Change when Buttons or Icons are Pressed Simple TroubleshootingEquipment does not Start Item to be checked Countermeasure Reference Image Density is too Low 289Image Density is too High Items to be checked Countermeasure Reference Images are Blurred Images are Stained Images are Partially Missing 291Functions cannot be Set 292 13.MAINTENANCE 293 Specifications & Options OPC 294 295 Continuous Copying Speed Unit sheets/min 296B4, FOLIO, LG, Comp 297 Specifications of OptionsReversing Automatic Document Feeder Large Capacity Feeder Additional Drawer Module 298A3, B4, FOLIO, LD, LG, LT-R, Comp MJ-1025 with mixed paper not loaded 299ST-R A3, B4, FOLIO, LD, LG, Comp Tray Loading Capacity MJ-1022 with mixed paper not loaded 300A3, FOLIO, LD Comp MJ-1022 with mixed paper loaded 301Bridge Unit Job Separator Offset Tray 302Hole Punch Unit 303 Packing List Combination Matrix 1/2 Copying Function Combination Matrix Combination Matrix 2/2 305 306 307 IndexNumerics 308 309 MaintenanceMagazine Sort 310 Switching to the ENERGY-SAVING Setting of Basic Copy ModesUsing the Editing Functions When the Graphic Symbols Blink on Touch Panel 312 Page 6LA91325000 R04022053500-TTEC