Toshiba e-STUDIO230/280 manual 122

7.IMAGE EDITING (Cont.)

4 Place an original on the glass to specify the area.

-Set the original face up with the bottom toward you, fit its top left corner against the top left corner of the glass, and align it with the original scale.

5	Using the original scale on the left and the
5	inner (top) scale, read the position of the
	desired area as follows:
	- X1 Distance from the top left to the left edge of the specified area.
	- X2 Distance from the top left to the right edge of the specified
	area.
	- Y1 Distance from the top left to the upper edge of the specified
	area.
	- Y2 Distance from the top left to the lower edge of the specified
	area.
	4 rectangular areas can be specified on an original.
6	Enter the distance values read in step 5
	for the specified area.

-Key in the value for X1 with the digital keys and press the [SET] button.

-Similarly, set the values for X2, Y1 and Y2.

-When setting X1, X2, Y1, Y2 the display changes for entering the next edit area.

7 Press the [ENTER] button.

8 Place the original(s).

-"1.SETTING ORIGINALS" Page 48

-Place the original(s) on the glass with its face down, with its bottom toward you, with its top left aligned against the original scale on the left side.

zSelect other copy modes as required.

9 Press the [START] button.

122 5.USING THE EDITING FUNCTIONS