Manuals / Craftsman / Lawn and Garden / Lawn Mower

Craftsman 917.28914 owner manual To Remove Wheel for Repairs, To Attach ,JUMPER Cables

Models: 917.28914

1 64
Download 64 pages 47.18 Kb
Page 25
Image 25

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key _ Do not Iose)_

3.Repair tire and reassemble°

NOTE; On rear wheels only: align grooves in rear wheel hub and axle. Insert square key. 4, Replace washers and snap retaining ring

securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent

flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant also

prevents tire dry rot and corrosion.

Washers

Retaining Axle

Square

Key_._..,

(Rear Wheel Only) -_"-

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT

The motion control lever has been preset atthe factory; adjustment should not be necessary.

1.Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

2o Start engine and move motion control lever until tractor does not move forward or backward.

3.Hold motion control lever in that position and turn engine off.

4.While holding motion control lever in

place, loosen the adjustment bolt.

5_ Move.motion control lever to the neutral (lock gate) position,

6.Tighten adjustment bolt securely.

Motion

Neutral

Lever

Lock

 

Gate

_ ...., ! Adjustment Bolt

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the trac- tor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

1, Loosen the adjustment bolto

2.Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep_

3.Tighten adjustment bolt securely.

4.Start engine and test°

5.if tractor still creeps, repeat above steps until satisfied.

TO START ENGINEWITH WEAK BATTERY AgAWARNING: Lead-acid batteries gener- ate explosive gases_ Keep sparks, flame and smoking materials away from batteries.

Always wear eye protection when around batteries°

Ifyour battery is too weak to start the engine, it should be recharged° (See "BATTERY" in the

MAINTENANCE section of this manual).

If "jumper cables" are used for emergency starting, follow this procedure:

IMPORTANT: "four tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles.

TO ATTACH ,JUMPER CABLES -

1.Connect one end ofthe RED cable to the

POSITIVE (+) terminal of each battery(A- B), taking care not to short against tractor chassis.

2_ Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries.

Weak or

Fully

Dead

Charged

Battery

Battery

25

Page 24 Page 26
Page 25
Image 25
Craftsman 917.28914 owner manual To Remove Wheel for Repairs, Transaxle Motion Control Lever Neutral Adjustment
Page 24 Page 26

917.28914 specifications

The Craftsman 917.28914 is a versatile lawn mower that stands out in the crowded market of outdoor power equipment. Renowned for its reliability and performance, this machine is designed to make lawn maintenance easier and more efficient for homeowners and gardening enthusiasts alike.

One of the key features of the Craftsman 917.28914 is its powerful 21-inch cutting deck, which allows users to cover a larger area in less time. The cutting height is adjustable, enabling users to tailor their mowing experience to the specific needs of their lawn, whether they prefer a closer cut or a higher one for a lush, healthy turf. The deck is constructed from durable steel, ensuring longevity and resilience against wear and tear from various terrain types.

Powered by a robust 140cc engine, the Craftsman 917.28914 delivers reliable performance that can handle thick grass and tough mowing conditions. Its easy-starting system ensures that users can get to work quickly without the frustration often associated with starting gas-powered mowers. This mower also integrates a self-propulsion technology, making it easier to navigate through uneven landscapes. This feature significantly reduces physical exertion, allowing users to mow larger areas without feeling fatigued.

Another notable characteristic is the mower's bagging system which efficiently collects clippings, reducing the need for additional clean-up after mowing. The rear discharge capability provides an alternative for users who prefer to leave clippings on the lawn to decompose and enrich the soil.

In terms of user comfort, the Craftsman 917.28914 includes ergonomic handles that reduce strain and vibration during operation. The lightweight design also contributes to ease of maneuverability, making it convenient to operate in tight spaces and around obstacles.

Overall, the Craftsman 917.28914 combines advanced technology with practical features to deliver a lawn mower that meets the demands of various users. Whether you're a seasoned gardener or a newcomer to lawn care, this mower promises to enhance your mowing experience with its efficiency, performance, and thoughtful design. With Craftsman’s reputation for quality and innovation, the 917.28914 is a reliable choice for maintaining a beautiful and healthy lawn.