Manuals / Craftsman / Lawn and Garden / Lawn Mower

Craftsman 917.28914 owner manual Before Starting the Engine Check Engine OIL Level, ADD Gasoline

Models: 917.28914

1 64
Download 64 pages 47.18 Kb
Page 14
Image 14

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

1.Check engine oil with tractor on level ground.

2.Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for afew seconds, remove and read oil level. If necessary, add oil until "FULl/' mark on dipstick is reached. Do not overfill

• For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual),

. To change engine oil, see the Maintenance section in this manual.

ADD GASOLINE

,Fill fueltank to bottom of filler neck. Do not overfill. Usefresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce

valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to ensure fuel freshness.

ACAUTION: Wipe offany spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: When operating in tempera- tures betow32 °F(0°C), use fresh, clean winter grade gasoline to help insure good cold weather starting.

CAUTION: Alcohol blended fuels (called gasohot or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic

gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the

fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur,

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

1.Be sure freewheel control is in the trans- mission engaged position.

2.Siton seat in operating position, depress clutchlbrake pedal and set parking brake.

3.Place motion control lever in neutral position.

4.Move attachment clutch to disengaged position.

5.Move throttle control to choke position. NOTE: Before starting, read the warm and cold starting procedures below_

6.Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry.

WARM WEATHER STARTING (50°F/10°C and above)

7. When engine starts, move the throttle control to the fast position.

•The attachments and ground drive can now be used. Ifthe engine does not accept the load, restart the engine and allow it to

warm up for one minute using the choke as described above_

COLD WEATHER STARTING (50°F/10°C and below)

7.When engine starts, leave throttle control in choke position until engine warms up and begins to run roughly. Once rough running begins, immediately move the throttle control to the fast position. Engine warm-up may take from several seconds to several minutes (the colder the tem- perature, the longer the warm-up).

AUTOMATIC TRANSMISSION WARM UP

Before driving the unit in cold weather, the transmission should be warmed up as fol- lows:

1.Be sure the tractor is on level ground.

2.Place the motion control lever in neutral. Release the parking brake and let the clutch/brake slowly return

to operating position.

3o Allow one minute for transmission to warm up. This can be done during

the engine warm up period.

• The attachments can also be used dur-

ing the engine warm-up period after the transmission has been warmed up.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32 ° F) the carburetor fuel mixture may need to be

adjusted for best engine performance (see "TO ADJUST CARBURETOR" in the Service

and Adjustments section of this manual).

14

Page 13 Page 15
Page 14
Image 14
Craftsman 917.28914 owner manual Before Starting the Engine Check Engine OIL Level, ADD Gasoline, To Start Engine
Page 13 Page 15

917.28914 specifications

The Craftsman 917.28914 is a versatile lawn mower that stands out in the crowded market of outdoor power equipment. Renowned for its reliability and performance, this machine is designed to make lawn maintenance easier and more efficient for homeowners and gardening enthusiasts alike.

One of the key features of the Craftsman 917.28914 is its powerful 21-inch cutting deck, which allows users to cover a larger area in less time. The cutting height is adjustable, enabling users to tailor their mowing experience to the specific needs of their lawn, whether they prefer a closer cut or a higher one for a lush, healthy turf. The deck is constructed from durable steel, ensuring longevity and resilience against wear and tear from various terrain types.

Powered by a robust 140cc engine, the Craftsman 917.28914 delivers reliable performance that can handle thick grass and tough mowing conditions. Its easy-starting system ensures that users can get to work quickly without the frustration often associated with starting gas-powered mowers. This mower also integrates a self-propulsion technology, making it easier to navigate through uneven landscapes. This feature significantly reduces physical exertion, allowing users to mow larger areas without feeling fatigued.

Another notable characteristic is the mower's bagging system which efficiently collects clippings, reducing the need for additional clean-up after mowing. The rear discharge capability provides an alternative for users who prefer to leave clippings on the lawn to decompose and enrich the soil.

In terms of user comfort, the Craftsman 917.28914 includes ergonomic handles that reduce strain and vibration during operation. The lightweight design also contributes to ease of maneuverability, making it convenient to operate in tight spaces and around obstacles.

Overall, the Craftsman 917.28914 combines advanced technology with practical features to deliver a lawn mower that meets the demands of various users. Whether you're a seasoned gardener or a newcomer to lawn care, this mower promises to enhance your mowing experience with its efficiency, performance, and thoughtful design. With Craftsman’s reputation for quality and innovation, the 917.28914 is a reliable choice for maintaining a beautiful and healthy lawn.