To Level Mower, Visual SIDE-TO-SIDE Adjustment

)PERAR

os diversos

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under

inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT

1.With all tires properly inflated and if your

lawn appears unevenly cut, determine which side of mower is cutting lower.

2.With a 3/4" or adjustable wrench, turn lift link adjustment nut (A) to the left to lower

LH side of mower, or, to the right to raise LH side of mower.

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

FRONT-TO-BACK ADJUSTMENT

IMPORTANT: Deck must be level side- to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is

1/8" to 1/2" lower than the rear tip when the ower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

, Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B)

to the ground at front and rear tip of the blade.

o If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11t16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

0310e

_ndard Institute.

IIENTO HACIA _1"- Permite la

) otro accesorio

E - Enciende y

CERO-

hacia adelante a sin apretar el

NTE- Se utiliza

;cia adelante. &S - Se utiliza ,cia atr&s.

_E- Desengan-

•o arrastrar. )E SERVtClOi

hay que hac- )rtadora.

Turn nut rig;	Turn nut	left
to raise mower	to lower	mower

3.Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT

1.With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect

your hands with gloves and/or wrap blade with heavy cloth.

2.Raise mower to its highest position.

3.At both sides of mower, position blade at side and measure the distance (A) from

bottom edge of blade to the ground. The distance should be the same on both sides.

4.If adjustment is necessary, see step 2 in Visual Adjustment instructions above.

5.Recheck measurements, adjust if neces- sary until both sides are equal.

With a 3/4" or adjustable wrench, turn front link adjustment nut (B) clockwise (tighten) to raise the front of mower, or,

counterclockwise (loosen) to lower the front mower.

	Tighten adjust nut	Loosen adjust
	Tighten adjust nut	nut B to lower
	B to raise mower	nut B to lower

mower

Loosen jam nut A first

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if neces- sary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

°Hold adjustment nut in position with wrench

and tighten jam nut securely against ad- justment nut.

28928, 917.289280 specifications

The Craftsman 917.289280 and 917.28928 are riding lawn mowers designed for homeowners looking for a reliable and effective solution for lawn care. These models are particularly notable for their blend of power, ease of use, and advanced features that enhance the mowing experience.

One of the standout characteristics of the Craftsman 917.289280 and 917.28928 is their robust engine. Equipped with a powerful 19 horsepower engine, these mowers ensure a strong performance, allowing users to tackle various terrains and thick grasses with ease. The engine is complemented by an efficient automatic transmission that provides smooth acceleration and deceleration, making it easy to navigate around the yard or garden.

The cutting deck is another important feature of these models. With a wide 42-inch cutting width, the mowers can cover more ground in fewer passes, significantly reducing mowing time. The cutting height adjustment is another convenient feature, allowing users to customize the height to suit their lawn’s needs, whether it's a clean trim or a higher cut during the growing season.

Technology plays a key role in the design of the Craftsman 917.289280 and 917.28928. The mowers are equipped with an added ergonomic dashboard that includes an easy-to-read fuel gauge and key start ignition. This design provides intuitive control and enhances the overall user experience. The mowers also incorporate safety features such as an automatic shut-off system when the operator leaves the seat, ensuring safe operation at all times.

Durability is a fundamental characteristic of these models. Built with a sturdy steel frame and high-quality materials, the Craftsman mowers are designed to withstand the rigors of regular use. The rear-wheel drive system enhances traction and maneuverability, allowing users to navigate tricky areas, including slopes and uneven ground.

Additionally, the mowers’ compact design allows for easy storage and transport. Their tight turning radius makes them adept at maneuvering around landscaping and obstacles, further increasing their efficiency and reducing the need for trimming.

In summary, the Craftsman 917.289280 and 917.28928 riding lawn mowers deliver a powerful performance with their reliable engines, versatile cutting capabilities, and user-friendly features. These models are ideal for homeowners seeking a practical and effective solution for lawn maintenance, combining modern technology with robust construction for lasting value.

Craftsman 28928 To Level Mower, Visual SIDE-TO-SIDE Adjustment, FRONT-TO-BACK Adjustment, Cero

Models: 28928 917.289280