TO USE CRUISE CONTROL

The cruise control feature can be used for

forward travel only.

SYSTEM CHARACTERISTICS

The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning.

•With forward drive pedal (K) depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT The position of the attachment lift lever (A) determines the cutting height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted

when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions, NOTE: Adjust gauge wheels with tractor on a flat level surface.

I, Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual).

2.With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appro- priate hole. Tighten securely.

3.Repeat for all, installing gauge wheel in same adjustment hole.

9}16

-Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil condi- tions, height of grass and types of grass being mowed.

•The average lawn should be cut to ap- proximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate

growth.

,For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut with at- tachment lift lever.

2.Start mower blades by engaging at- tachment clutch control.

12

Page 11 Page 13
Page 12
Image 12
Craftsman 917.289280 manual To USE Cruise Control, System Characteristics, To Adjust Gauge Wheels, To Operate Mower
Page 11 Page 13

28928, 917.289280 specifications

The Craftsman 917.289280 and 917.28928 are riding lawn mowers designed for homeowners looking for a reliable and effective solution for lawn care. These models are particularly notable for their blend of power, ease of use, and advanced features that enhance the mowing experience.

One of the standout characteristics of the Craftsman 917.289280 and 917.28928 is their robust engine. Equipped with a powerful 19 horsepower engine, these mowers ensure a strong performance, allowing users to tackle various terrains and thick grasses with ease. The engine is complemented by an efficient automatic transmission that provides smooth acceleration and deceleration, making it easy to navigate around the yard or garden.

The cutting deck is another important feature of these models. With a wide 42-inch cutting width, the mowers can cover more ground in fewer passes, significantly reducing mowing time. The cutting height adjustment is another convenient feature, allowing users to customize the height to suit their lawn’s needs, whether it's a clean trim or a higher cut during the growing season.

Technology plays a key role in the design of the Craftsman 917.289280 and 917.28928. The mowers are equipped with an added ergonomic dashboard that includes an easy-to-read fuel gauge and key start ignition. This design provides intuitive control and enhances the overall user experience. The mowers also incorporate safety features such as an automatic shut-off system when the operator leaves the seat, ensuring safe operation at all times.

Durability is a fundamental characteristic of these models. Built with a sturdy steel frame and high-quality materials, the Craftsman mowers are designed to withstand the rigors of regular use. The rear-wheel drive system enhances traction and maneuverability, allowing users to navigate tricky areas, including slopes and uneven ground.

Additionally, the mowers’ compact design allows for easy storage and transport. Their tight turning radius makes them adept at maneuvering around landscaping and obstacles, further increasing their efficiency and reducing the need for trimming.

In summary, the Craftsman 917.289280 and 917.28928 riding lawn mowers deliver a powerful performance with their reliable engines, versatile cutting capabilities, and user-friendly features. These models are ideal for homeowners seeking a practical and effective solution for lawn maintenance, combining modern technology with robust construction for lasting value.
Top Page Image Contents