![](/images/new-backgrounds/1095598/9559813x1.webp)
Keys
Slope Sheet
(1) Oil Drain Tube
For Future Use
(2) Keys
"{our new tractor has been assembled at the factory with the exception of those parts left
unassembled for | shipping | purposes. |
| |||||
TOOLS | REQUIRED | FOR | ASSEMBLY | |||||
A socket | wrench | set will | make | assembly | ||||
easier. | Standard | wrench | sizes | are | listed. | |||
(1) | 1/2" | wrench |
| Tire | pressure | gauge | ||
(2) | 7/16" | wrenches |
| Utility | knife | LABEL |
Pliers
When right or left hand is mentioned in this manual, itmeanswhenyou are in theoperating position (seated behind the steering wheel).
TO REMOVE TRACTOR FROM CARTON
UNPACK CARTON
•Remove all accessible loose parts and parts cartons from carton.
•Cut along dotted lines on all four pan- els of carton. Remove end panels and lay side panels flat.
•Check for any additional loose parts or cartons and remove.
ADJUST SEAT
1.Sit in seat.
2.Lift up adjustment lever (A) and slide seat until a comfortable position is reacl_ed which allows you to press clutch/brake pedal all the way down,
3.Release lever to lock seat in position.
BEFORE REMOVING TRACTOR FROM SKID
CHECK BATTERY
1, Lift hood to raised position,
NOTE: If this battery is put into service after month and year indicated on label (label is located between terminals)
charge battery for minimum of one hour at
7