_I6N

_Utractor nuevo, rendirn[ento y la

_cto de calidad. continuacion: is instrucciones

en Ia caja de

_rgada en forma

i forma c6moda

fladas en ferma iv[o, las Ilantas F_.brica.)

) segador est6

de tado a lado y _araobtener los

rte. (Las llantas orrna adecuada

3ulsi6n y de la _corran el paso 3oleas y dentro correas.

;que todas las guras y que los _rmaadecuada.

asegQrese que

;en la posicl6n a" (Yea "PARA ',i6nde la Oper-

como usar su

los puntos de continuacion:

e tlegar al nivel

tiene que estar regular, nueva

controles - su #elos antes de

; frenos estL_ en

_egura.

_ade Presencia Funcionamiento nodo adecuado

lcienamiento y lal).

nsmisi6n antes mera vez. Siga

para el empiezo

EMPESAR EL ,R LA TRANS-

Operaci6n de

TO CHECK BRAKE

tf tractor requires more than five (5) feet to stop at highest speed in highest gear on a

level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

1.Park tractor on a level, dry concrete or paved surface, depress brake pedal

all the way down and engage parking brake.

2.Disengage transmission by placing freewheel control in "transmission dis-

engaged" position. Pull freewheel con- trol out and into the slot and release so

it is held in the disengaged position. The rear wheels must lock and skid

when you try to manually push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a

Sears or other qualified service center.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and

camber is set at the factory and is normal. The front wheel toe-in and camber are

not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a Sears or other qualified service center.

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rearwheels only: align grooves in rear wheel hub and axle. Insert square key.

4.Replacewashers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent

flat tires due to slow leaks, purchase and use ti re sealant from Sears. Tire sealant also

prevents tire dry rot and corrosion.

Washers

Retaining

Ring

TO START ENGINE WiTH A WEAK BAT-

TERY

_WARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries.

Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" inthe

MAINTENANCE section of this manual).

if "jumper cables" are used for emergency starting, follow this procedure:

IMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles.

TO ATTACH JUMPER CABLES -

1.Connect one end ofthe RED cable to the POSITIVE (+) terminalof each battery(A-

B), taking care not to short against tractor chassis.

2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries.

Weak or Dead Fully Charged

BatteryBattery

Axle Cover

I

,,Square Key (Rear Wheel Only)

25

Page 25
Image 25
Craftsman 28928 manual Empesar EL ,R LA Trans, To Check Brake, Front Wheel TOE-IN/CAMBER, To Remove Wheel for Repairs, Tery

28928, 917.289280 specifications

The Craftsman 917.289280 and 917.28928 are riding lawn mowers designed for homeowners looking for a reliable and effective solution for lawn care. These models are particularly notable for their blend of power, ease of use, and advanced features that enhance the mowing experience.

One of the standout characteristics of the Craftsman 917.289280 and 917.28928 is their robust engine. Equipped with a powerful 19 horsepower engine, these mowers ensure a strong performance, allowing users to tackle various terrains and thick grasses with ease. The engine is complemented by an efficient automatic transmission that provides smooth acceleration and deceleration, making it easy to navigate around the yard or garden.

The cutting deck is another important feature of these models. With a wide 42-inch cutting width, the mowers can cover more ground in fewer passes, significantly reducing mowing time. The cutting height adjustment is another convenient feature, allowing users to customize the height to suit their lawn’s needs, whether it's a clean trim or a higher cut during the growing season.

Technology plays a key role in the design of the Craftsman 917.289280 and 917.28928. The mowers are equipped with an added ergonomic dashboard that includes an easy-to-read fuel gauge and key start ignition. This design provides intuitive control and enhances the overall user experience. The mowers also incorporate safety features such as an automatic shut-off system when the operator leaves the seat, ensuring safe operation at all times.

Durability is a fundamental characteristic of these models. Built with a sturdy steel frame and high-quality materials, the Craftsman mowers are designed to withstand the rigors of regular use. The rear-wheel drive system enhances traction and maneuverability, allowing users to navigate tricky areas, including slopes and uneven ground.

Additionally, the mowers’ compact design allows for easy storage and transport. Their tight turning radius makes them adept at maneuvering around landscaping and obstacles, further increasing their efficiency and reducing the need for trimming.

In summary, the Craftsman 917.289280 and 917.28928 riding lawn mowers deliver a powerful performance with their reliable engines, versatile cutting capabilities, and user-friendly features. These models are ideal for homeowners seeking a practical and effective solution for lawn maintenance, combining modern technology with robust construction for lasting value.