Cypress CY7C0430BV manual Maximum Ratings, Electrical Characteristics Over the Operating Range

CY7C0430BV

CY7C0430CV

Maximum Ratings

(Above which the useful life may be impaired. For user guide- lines, not tested.)

Storage Temperature	–65°C to + 150°C
Ambient Temperature............................................with	–55°C to + 125°C
Power Applied
Supply Voltage to Ground Potential	–0.5V to + 4.6V
DC Voltage Applied to
Outputs in High-Z State	–0.5V to VCC + 0.5V
DC Input Voltage	–0.5V to VCC + 0.5V

Electrical Characteristics Over the Operating Range

Output Current into Outputs (LOW)	............................. 20 mA
Static Discharge Voltage	> 2200V
Latch-up Current	> 200 mA

Operating Range

Range	Ambient Temperature	VDD
Commercial	0°C to +70°C	3.3V ± 150 mV
Industrial	–40°C to +85°C	3.3V ± 150 mV

						Quadport DSE Family
					–133				–100
Parameter			Description								Unit
				Min.	Typ.		Max.	Min.	Typ.	Max.
VOH	Output HIGH Voltage			2.4				2.4			V
	(VCC = Min., IOH = –4.0 mA)
VOL	Output LOW Voltage						0.4			0.4	V
	(VCC = Min., IOH = +4.0 mA)
VIH	Input HIGH Voltage			2.0				2.0			V
VIL	Input LOW Voltage						0.8			0.8	V
IOZ	Output Leakage Current			–10			10	–10		10	∝A
ICC	Operating Current (VCC = Max., IOUT = 0 mA)				350		700		300	550	mA
	Outputs Disabled, CE = VIL, f = fmax
ISB1	Standby Current (four ports toggling at TTL				80		200		60	150	mA
	Levels,0 active)
	CE1-4≥ VIH, f = fMAX
ISB2	Standby Current (four ports toggling at TTL				150		300		125	250	mA
	Levels, 1 active) CE1 CE2 CE3 CE4 < VIL,
	f = fMAX
ISB3	Standby Current (four ports CMOS Level, 0				1.5		15		1.5	15	mA
	active)	CE	1–4≥ VIH, f = 0
ISB4	Standby Current (four ports CMOS Level, 1				110		290		85	240	mA
	active and toggling) CE1 CE2 CE3 CE4 <
	VIL, f = fMAX
JTAG TAP Electrical Characteristics Over the Operating Range

Parameter	Description	Test Conditions	Min.	Max.	Unit
VOH1	Output HIGH Voltage	IOH = −4.0 mA	2.4		V
VOL1	Output LOW Voltage	IOL = 4.0 mA		0.4	V
VIH	Input HIGH Voltage		2.0		V
VIL	Input LOW Voltage			0.8	V
IX	Input Leakage Current	GND ≤ VI ≤ VDD	–100	100	∝A

Capacitance

	Parameter	Description	Test Conditions	Max.	Unit
	CIN (All Pins)	Input Capacitance	TA = 25°C, f = 1 MHz,	10	pF
			VCC = 3.3V
	COUT (All Pins)	Output Capacitance		10	pF
	CIN (CLK Pins)	Input Capacitance		15	pF
	COUT (CLK Pins)	Output Capacitance		15	pF
Document #: 38-06027 Rev. *B					Page 8 of 37

[+] Feedback