SERVICE REMINDER/HOUR METER

Service reminder shows the total number of hours the engine has run and flashes to indicate that the engine or mower needs ser- vicing. When service is required, the service reminder will flash for two hours. To service

engine and mower, see the Maintenance section of this manual.

NOTE: Service reminder runs when the

ignition key is in any position but "STOP". For acurate reading, be sure key remains in the "STOP" position when engine is not running.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

1.Check engine oil with tractor on level ground.

2.Unthread and remove oil fill cap/dipstick; wipe oil off. Reinsert the dipstick into the tube and rest oil fill cap on the tube. Do

not thread the cap ontothetube. Remove and read oil level. If necessary, add oil until "FULl" mark on dipstick is reached. Do not overfill.

3.For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual).

4.To change engine oil, seethe Maintenance section in this manual.

5.Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

Ai_,CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: When operating in tempera- tures below 32°F (0°C), use fresh, clean winter grade gasoline to help ensure good cold weather starting.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damagethe fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

1.Be sure freewheel control is in the trans- mission engaged position.

2.Sit on seat in operating position, depress brake pedal and set parking brake.

3.Move attachment clutch to disengaged position.

4.Move throttle control to fast position

5.Pull choke control out for a cold engine start attempt. For a warm engine start

attempt the choke control may not be needed.

NOTE: Before starting, read the warm and cold starting procedures below.

6.Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, push choke control in, wait a few minutes and try again. If engine still does not start, pull the choke control out and retry.

18

Page 17 Page 19
Page 18
Image 18
Craftsman 917.28991 manual Before Starting the Engine, To Start Engine, Check Engine OIL Level, Service REMINDER/HOUR Meter
Page 17 Page 19

917.28991, 28991 specifications

The Craftsman 28991, also referred to by its model number 917.28991, is a robust lawn mower designed for efficiency and convenience in residential landscaping. This particular model is tailored to meet the diverse needs of homeowners who seek a reliable solution for lawn care.

One of the foremost features of the Craftsman 28991 is its powerful engine. Equipped with a high-performance, gasoline-powered engine, it delivers ample power to tackle various types of grass and terrain. The engine’s design emphasizes reliability, ensuring that users can depend on it without frequent maintenance issues.

The mower includes a versatile cutting deck that is adjustable, offering multiple height settings. This adjustment capability allows users to customize the cutting height to suit their lawn type and personal preferences. Whether you prefer a low trim for a manicured look or a higher cut for a more natural appearance, this mower accommodates those needs effortlessly.

With a focus on user comfort, the Craftsman 28991 features an ergonomic handle. The handle's design is meant to reduce fatigue during extended mowing sessions, allowing for a more pleasant mowing experience. The mower also incorporates a self-propelling mechanism, which makes it easier to maneuver across varying terrains, especially on slopes or uneven ground.

In terms of technology, the Craftsman 28991 offers a bagging option alongside mulching capabilities. The rear bag collects grass clippings, reducing the need for additional yard cleanup, while the mulching feature finely chops the clippings, returning vital nutrients back to the lawn. This dual-functionality promotes a healthier lawn while simplifying the mowing process.

The construction of the Craftsman 28991 highlights durability. Its steel deck is designed to withstand the rigors of frequent use, ensuring longevity while maintaining performance. Additionally, the design includes oversized wheels that enhance traction and maneuverability, making it suitable for navigating tight spaces and obstacles.

Overall, the Craftsman 28991,917.28991 is an exceptional choice for homeowners looking for a dependable, feature-rich mower. With its powerful engine, adjustable cutting deck, ergonomic design, and dual-functioning capabilities, it stands out as a reliable tool for achieving a well-maintained lawn with minimal effort.
Top Page Image Contents