TO MOVE FORWARD AND BACKWARD

The direction and speed of movement is controlled by the forward and reverse drive pedals.

1. Start tractor and release parking brake.

2.Slowly depress forward (K) or reverse(L) drive pedal to begin movement. Ground speed increases the further down the pedal is depressed.

TO USE CRUISE CONTROL

The cruise control feature can be used for forward travel only.

SYSTEM CHARACTERISTICS

The cruise control should only be used

while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough tertian or while trimmimg or turning.

• With forward drive pedal depressed to desired speed, pull cruise control lever

(J)up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal, tap on forward drive pedal or push the cruise control lever down.

TO ADJUST MOWER CUTTING HEIGHT The position of the attachment lift lever (A) determines the cutting height.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not run- ning. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

The average lawn should be cut to ap-

proximately 2-1/2" during the cool sea- son and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth.

For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted when they are slightly offthe ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

1.Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual).

2.With mower in desired height of cut posi- tion, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

3.Repeat for all, installing gauge wheel in same adjustment hole.

Put attachment lift lever in desired cutting

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt bythe operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough,

rolling terrain or hills.

1. Select desired height of cut with attach-

height slot.

ment lift lever,

2. Start mower blades by engaging attach- ment clutch control.

16

Page 16
Image 16
Craftsman 917.28991 manual To Move Forward and Backward, To Operate Mower, To USE Cruise Control, System Characteristics

917.28991, 28991 specifications

The Craftsman 28991, also referred to by its model number 917.28991, is a robust lawn mower designed for efficiency and convenience in residential landscaping. This particular model is tailored to meet the diverse needs of homeowners who seek a reliable solution for lawn care.

One of the foremost features of the Craftsman 28991 is its powerful engine. Equipped with a high-performance, gasoline-powered engine, it delivers ample power to tackle various types of grass and terrain. The engine’s design emphasizes reliability, ensuring that users can depend on it without frequent maintenance issues.

The mower includes a versatile cutting deck that is adjustable, offering multiple height settings. This adjustment capability allows users to customize the cutting height to suit their lawn type and personal preferences. Whether you prefer a low trim for a manicured look or a higher cut for a more natural appearance, this mower accommodates those needs effortlessly.

With a focus on user comfort, the Craftsman 28991 features an ergonomic handle. The handle's design is meant to reduce fatigue during extended mowing sessions, allowing for a more pleasant mowing experience. The mower also incorporates a self-propelling mechanism, which makes it easier to maneuver across varying terrains, especially on slopes or uneven ground.

In terms of technology, the Craftsman 28991 offers a bagging option alongside mulching capabilities. The rear bag collects grass clippings, reducing the need for additional yard cleanup, while the mulching feature finely chops the clippings, returning vital nutrients back to the lawn. This dual-functionality promotes a healthier lawn while simplifying the mowing process.

The construction of the Craftsman 28991 highlights durability. Its steel deck is designed to withstand the rigors of frequent use, ensuring longevity while maintaining performance. Additionally, the design includes oversized wheels that enhance traction and maneuverability, making it suitable for navigating tight spaces and obstacles.

Overall, the Craftsman 28991,917.28991 is an exceptional choice for homeowners looking for a dependable, feature-rich mower. With its powerful engine, adjustable cutting deck, ergonomic design, and dual-functioning capabilities, it stands out as a reliable tool for achieving a well-maintained lawn with minimal effort.