Toget througha really tough section of sod or hard ground, apply upward pres- sure on handle or lower the depth stake.
CULTIVATING
Cultivating is destroying the weeds between rows to prevent them from rob- bing nourishment and moisture from the plants. At the same time, breaking up the upper layer of soil crust will help retain moisture in the soil. Best digging depth is 1" to 3"
. Cultivate up and down the rows at a speed which will allow tines to uproot weeds and leave the ground in rough condition, promoting no further growth of weeds and grass.
T_NI= SHEAR PiNS
The tine assemblies on your tiller are secured to the tine shaft with shear pins (See "TINE REPLACEMENT" in the Service and Adjustments section of this manual).
If the tiller is unusually overloaded or jammed, the shear pins are designed to break before internal damage occurs to the transmission,
o If shear pin(s) break, replace only with those shown in the Repair Parts section of this manual
0 O0 0 _0
0 O0 0 0
0 O0 0 _0
0 O0 0 0
12
