INSERTCABLE CLIP
•Insert plastic cable clip into hole on the back of handle column, Push cables
into clipo
Handle Column
Cables
Cable Clip
CONNECT SHIFT ROD
=Insert end of shift rod farthest from bend into hole of shift lever indicator°
oInsert hairpin clip through hole of shift rod to secure.
°Insert other end of shift rod into hole in shift lever,
°Insert second hairpin clip through hole of shift rod.
REMOVE TILLER FROM CRATE
- Adjust handle assemby to lowest posi- tion_Be sure lock lever is tightened
securely.
,,Make sure shift lever indicator is in "N"
(neutral) position,
°Tilt tiller forward by lifting handle.
Separate cardboard cover from leveling shield°
oRotate tiller handle to the right and pull tiller out of carton.
CHECK TIRE PRESSURE
The tires on your unit were overinflated at the factory for shipping purposes, Correct and equal tire pressure is important for best tilling performance.
oReduce tire pressure to 20 PSI.
HANDLE HEIGHT
oHandle height may be adjusted to better suit operator, (See 'q'OADJUST HAN- DLE HEIGHT" in the Service and Adjustments section of this manual),
Attach this end to shift lever |
| |
this End To shift | k | |
Lever | Indicator | Shift Rod |
Shift Rod | Hairpin Clip | Shift Lever |
|
| Indicator |
Shift Lever
,, i "_ '
Ha_rpLnClip
Shift
