INSERTCABLE CLIP
•Insert plastic cable clip into hole on the back of handle column. Push cables into clip.
Handle Column
Cables
Cable Clip
CONNECT SHIFT ROD
•Insert end of shift rod farthest from bend into hole of shift lever indicator.
•Insert hairpin clip through hole of shift rod to secure.
•Insert other end of shift rod into hole in shift lever.
•Insert second hairpin clip through hole of
shift rod with bend of clip on rinht side.
REMOVE TILLER FROM CRATE.
•Adjust handle assemby to lowest posi- tion. Be sure lock lever is tightened securely.
•Make sure shift lever indicator is in "N" (neutral) position.
•Tilt tiller forward by lifting handle.
Separate cardboard cover from leveling shield.
•Rotate tiller handle to the dght and pull tiller out of carton.
Attach this end to shift lever
_"_Attach this EndTo shi" _ | Shift Rod |
Lever indicator
Hairpin Clip Shift Lever
ndicator
Shift Rod
Shift Lever
Shift.od\ Lk
CHECK TIRE PRESSURE
The tires on your unit were overinflated at the factory for shipping purposes. Correct and equal tire pressure is important for best tilling performance.
•Reduce tire pressure to 20 PSI.
HANDLE HEIGHT
•Handle height may be adjusted to better suit. operator. (See "TO ADJUST HAN- DLE HEIGHT" in the Service and Adjustments section of this manual).
7
