3.Returnmowerto uprightposition.

4.Installnew drive belt into idlerarm

assembly,then aroundthedrive pulley. Besure belt is insideof belt keepers.

5.Reattachidlerarm assemblywith hex

nut previouslyremoved.

6.Turnlawn moweron its side. Make sure air filter andcarburetorare up.

7.Reattachdebrisshield to housingwith tab of debrisshield in housinghole.

8.Positionbladeon the bladeadapter aligningthe two (2) holesin the blade with the raisedlugs on the adapter.

9.Besure the trailing edgeof blade (op- positesharp edge)is up towardthe

engineas shown.

10.Installthe blade boltwith the lock washerand hardenedwasherinto

blade adapterand crankshaft. 11.Use blockof wood betweenbladeand

lawn mowerhousingand tightenthe blade bolt,turningclockwise.

•Therecommendedtighteningtorque is 35-40ft. Ibs.

IMPORTANT: Bladebolt is heattreated.

If bolt needsreplacing,replaceonlywith

approvedbolt shownin the Repair Parts sectionof thismanual.

12.Returnmowerto uprightposition. 13.Reattachdrive cableand returnspring

to the idlerarm assembly,then reat- tach drivecableto anchor.

14.Reattachdrive coverwith screw(s) previouslyremoved.

15.Connectspark plugwire to spark plug.

TO ADJUST HANDLE

The handle on your lawn mower has three

(3)height positions - adjust to height that suits you.

1.Remove knob and carriage bolt on one side of the lower handle.

2.While holding handle assembly, remove knob and carriage bolt from opposite side,

Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more.

LAWN MOWER

When lawn mower is to be stored for a

period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire lawn mower (See "CLEANING" in the Maintenance sec-

tion of this manual).

align hole in handle with desired hole in handle bracket and reassemble bolt and

knob and tighten securely.

3.Align opposite side of handle with same positioning hole and secure with bolt and knob.

Hi

_

Bolt

 

/

 

bracket

Knob

ENGINE

ENGINE SPEED

Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your lawn mower to a Sears or other qualified service center for repair and adjustment.

CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to a Sears or other qualified service center for repair or adjustment.

IMPORTANT: Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed

setting can be dangerous. If you think

the engine-governed high speed needs adjusting, contact a Sears or other qualified service center, which has proper equipment and experience to make any necessary adjustments.

2.Lubricate as shown in the Maintenance section of this manual.

3.Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

4.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

HANDLE

You can fold your mower handle for storage.

17

Page 16 Page 18
Page 17
Image 17
Craftsman 917.37074 manual To Adjust Handle, Engine Engine Speed, Carburetor
Page 16 Page 18

917.37074 specifications

The Craftsman 917.37074 is a powerful and versatile lawn tractor designed to tackle a variety of yard tasks with ease and efficiency. Known for its robust construction and user-friendly features, this model has gained popularity among homeowners and gardening enthusiasts alike.

One of the standout features of the Craftsman 917.37074 is its performance. The tractor is equipped with a powerful 24 HP Briggs & Stratton engine, which provides reliable starting and consistent power for mowing, hauling, and other outdoor applications. The engine is paired with a smooth hydrostatic transmission that allows for easy speed adjustments without the need for manual shifting, making it simple to navigate around obstacles or varying terrains.

In terms of cutting performance, the Craftsman 917.37074 boasts a wide 42-inch cutting deck. This size enables the tractor to cover more ground in less time, making it perfect for medium to large-sized lawns. The cutting deck features a robust steel construction for durability, and an adjustable cutting height allows users to achieve their desired grass length, promoting a healthy lawn.

User comfort is also a top priority in the design of the Craftsman 917.37074. The tractor is equipped with an ergonomic seat that offers support during lengthy mowing sessions. The steering wheel is designed for easy maneuverability, and the built-in cup holder adds convenience for those long hours outdoors.

Additionally, the Craftsman 917.37074 incorporates several innovative technologies, including easy-to-use controls and a clear, comprehensive dashboard display. This allows the operator to monitor critical information such as fuel levels and speed, enhancing the overall mowing experience. Furthermore, the tractor is compatible with various attachments and accessories that expand its utility, including baggers, mulchers, and snow throwers.

Durability is another hallmark of the Craftsman 917.37074. Designed to withstand the rigors of frequent use, the lawn tractor features a heavy-duty frame and reinforced components that ensure longevity and reliability.

In summary, the Craftsman 917.37074 combines power, efficiency, and user-friendly design into a single, highly capable lawn tractor. Its performance capabilities, comfortable features, and robust construction make it an excellent choice for anyone looking to maintain their yard effectively.
Top Page Image Contents