3.3 Removing and Attaching Base
To remove infant restraint, squeeze handle at | |
back of seat and lift infant restraint from base | |
as shown . |
|
To put infant restraint in base, push infant |
|
restraint down until it clicks into base. Pull up |
|
on infant restraint to be sure it is latched |
|
firmly into base. |
|
3.4 Adjusting Handle |
1.Press handle adjustment buttons on both sides of handle .
2.Rotate handle until it clicks into any of the 5 positions:
Position A: MUST be used
when carrying by handle,
Position B,C,D: are convenience positions,
Position E: is the sitting position,
NEVER use positions B or C in the vehicle.
BOTH handle adjustment
buttons must pop out to lock handle in place .
3.Push and pull on the handle to be sure it is locked firmly in position.
Carrying | B | |
A |
C
D
E Sitting
13
