6.1.1 3-Point Harness

1.From back, push harness anchor buckle back through harness slot.

If necessary, from front, use harness strap to pull buckle from slot .



Harness tightener Harness anchor

buckle

2. Reinsert harness anchor buckle in the



appropriate slot .

3. From back, remove harness strap from harness tightener. If necessary, from front, use harness strap to pull strap from slot.

4.Reinsert strap in the appropriate slot. Thread strap through tightener exactly as shown .

5.SAFETY CHECK:

a)CHECK that straps are not twisted;

b)CHECK that straps are secure: pull on harness straps from front.

c)CHECK that harness anchor buckle is snapped flat against back as shown .





28

Page 60
Image 60
Graco 6900 Series manual 1 3-Point Harness, Reinsert harness anchor buckle Appropriate slot , Safety Check