Craftsman 917.374100 owner manual Lawn Mower, Drive Wheels

Models: 917.374100

1 52
Download 52 pages 33.71 Kb
Page 14
Image 14

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check rear drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash,

grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both rear wheels.

5.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

6.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

BLADE CARE

For best results, mower blade must be kept

sharp. Replace a bent or damaged blade. A CAUTION: Use only a replacement

blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is haz- ardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from

turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware (bolt, lock washer, hardened washer).

6.Remove debris shield.

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position blade adapter on engine crank- shaft. Be sure key in adapter and crank-

shaft keyway are aligned; and that drive belt is inside tabs of belt retainer.

2.Install debris shield.

3.Position blade on the blade adapter. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on blade adapter.

4.Be sure the trailing edge of blade (oppo- site sharp edge) is up toward engine.

 

 

Belt

 

retainer

 

Trailing

edge

Blade adapter

 

 

 

Hardened

Debris shield

washer

 

Lockwasher

Blade

Blade

bolt

TO SHARPEN BLADE

NOTE: We do not recommend sharpening

blade - but if you do, be sure blade is bal- anced. An unbalanced blade will cause

eventual damage to mower or engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a

5/8" diameter steel bolt, pin, ora cone bal- ancer. (When using a cone balancer, follow instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center hole

5/8" bolt or pin

14Blade

Page 14
Image 14
Craftsman 917.374100 owner manual Lawn Mower, Drive Wheels

917.374100 specifications

The Craftsman 917.374100 is a notable lawn tractor that combines power, precision, and user-friendly features, making it an exceptional choice for homeowners looking to maintain their lawns efficiently. Designed with a focus on reliability and performance, this model is equipped to handle a range of mowing tasks with ease.

At the heart of the Craftsman 917.374100 is its robust engine. The tractor is powered by a reliable 17.5 HP Kohler engine, which delivers consistent performance and efficient fuel consumption. This powerful engine allows the tractor to tackle even the most challenging terrains effortlessly, ensuring that users can mow their lawns quickly and effectively.

One of the standout features of the 917.374100 is its 42-inch cutting deck. This wide cutting path not only reduces mowing time but also enables the tractor to cover more ground in a single pass. The deck is designed for versatility, allowing users to choose from multiple cutting heights to achieve their desired grass length. The easily adjustable cutting height feature ensures that users can adapt their mowing based on the season and grass type.

In terms of ease of use, the Craftsman 917.374100 excels. It comes equipped with a comfortable and ergonomically designed seat that enhances driver comfort during longer mowing sessions. The intuitive dashboard features easy-to-read gauges, allowing users to monitor their speed, fuel level, and engine status at a glance. Additionally, the tractor boasts a tight turning radius, making it suitable for navigating around flower beds and landscaping features.

The Craftsman 917.374100 also integrates advanced technology for enhanced functionality. The automatic transmission provides a smooth and responsive driving experience, allowing users to easily change speeds without the need for manual gear shifting. Moreover, the tractor is designed for easy maintenance, with a front access feature that facilitates easy cleaning and blade maintenance.

Safety features are paramount in the design of the 917.374100. The tractor includes a safety switch that automatically shuts down the engine if the operator leaves the seat while the blades are engaged. This thoughtful feature gives users peace of mind while working.

In summary, the Craftsman 917.374100 is a powerful and reliable lawn tractor that offers a range of user-friendly features, advanced technologies, and impressive cutting capabilities. It is an ideal choice for homeowners seeking to maintain their lawns efficiently and comfortably. With its combination of performance, versatility, and safety, this model stands out as a leading option in the lawn care market.