BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual.

,A CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup.

1.Be sure lawnmower is level.

2.Remove oil dipstick from oil fill spout.

3.You receive a container of oil with the

unit. Slowly pour the entire container down the oil fill spout into the engine.

NOTE: Initial oi! fill requires only 18 oz. due to residual oil in engine from the manufacturers 100% quality testing. When changing oil you may need 20 oz.

4.Insert and tighten dipstick.

IMPORTANT:

• Check oil level before each use. Add oil

if needed. Fill to full line on dipstick.

•Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. See "TO CHANGE ENGINE OIL" in the Mainte- nance section of this manual.

Gasoline filler cap

Engine

 

oil cap

Primer

ADD GASOLINE

•Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel fresh- ness.

A CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline

near an open flame.

ii, CAUTION: Alcohol blended fuels (called gasohol or using ethanol or metha- nol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO STOP ENGINE

•To stop engine, release operator pres- ence control bar.

TO START ENGINE

NOTE: Due to protective coatings on the engine, a small amount of smoke may be

present during the initial use of the product and should be considered normal.

1.To start a cold engine, push primer three (3) times before trying to start. Use a firm push. This step is not usually necessary when starting an engine which has already run for a few minutes.

2.Hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back.

NOTE: In cooler weather it may be necessary to repeat priming steps. In warmer weather over priming may cause flooding and engine will not start. If you do flood engine, wait a few minutes before attempting to start and do not repeat priming steps.

9

Page 8 Page 10
Page 9
Image 9
Craftsman 917.375010 owner manual Add Oil, ADD Gasoline, To Stop Engine, To Start Engine
Page 8 Page 10

917.375010 specifications

The Craftsman 917.375010 is a riding lawn mower that combines efficiency, durability, and ease of use, making it an ideal choice for homeowners with medium to large-sized lawns. Engineered for performance, this mower is equipped with impressive features that set it apart from other competitive models.

One of the standout characteristics of the Craftsman 917.375010 is its powerful engine. It comes fitted with a Briggs & Stratton engine that delivers strong performance and reliable starting. The engine's multi-speed transmission provides enhanced control while mowing, allowing users to tailor the speed to their specific lawn needs. This feature is essential for achieving an even cut in various terrains.

Another key aspect of this riding mower is its cutting deck. The 42-inch cutting deck is designed for optimum maneuverability and efficiency, making it suitable for getting into tight spaces and around obstacles. Additionally, the adjustable cutting height allows users to select from multiple positions, enabling customization based on grass type and seasonal growth.

The Craftsman 917.375010 also integrates advanced technologies that contribute to its ease of use. The electric start feature eliminates the hassle of manual cranking, ensuring that users can start the mower with just the turn of a key. Moreover, the mower is equipped with an automatic transmission that allows for seamless shifting, making it user-friendly even for those unfamiliar with operating riding mowers.

Comfort is another notable characteristic of the Craftsman 917.375010. It comes with an ergonomic seat designed for extended use, and the steering system is tailored for easy handling. The foot-controlled operation further enhances comfort and reduces fatigue during mowing sessions, allowing homeowners to tackle their lawn care chores with ease.

Maintenance of the Craftsman 917.375010 is made more manageable thanks to its built-in features. The mower comes with easy-access points for oil changes and blade adjustments, making it less of a chore for owners to keep their equipment in top shape.

In summary, the Craftsman 917.375010 is a formidable riding lawn mower that boasts a powerful engine, adjustable cutting deck, and user-friendly features. Its integration of comfort and advanced technology makes lawn care a breeze, ensuring that homeowners can maintain their outdoor spaces with precision and efficiency. Whether you have a sprawling yard or a more compact area, this mower is equipped to handle the job with ease.
Top Page Image Contents