TO EMPTY GRASS CATCHER

1.Lift up on grass catcher using the frame handle.

2.Remove grass catcher with clippings from under lawn mower handle.

3.Empty clippings from bag using both frame handle and bag handle.

NOTE: Do not drag the bag when empty- ing; it will cause unnecessary wear.

Grass catcher frame

_i, CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline

near an open flame.

,A CAUTION: Alcohol blended fuels (called gasohol or using ethanol or metha- nol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual.

A CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup.

1.Be sure lawnmower is level.

2.Remove oil dipstick from oil fill spout.

3.You receive a container of oil with the

unit. Slowly pour the entire container down the oil fill spout into the engine.

NOTE: Initial oi! fill requires only 18 oz. due to residual oil in engine from the manufacturers 100% quality testing. When changing oil you may need 20 oz.

4.Insert and tighten dipstick.

IMPORTANT:

• Check oil level before each use. Add oil

if needed. Fill to full line on dipstick. Change the oil after every 25 hours of operation or each season. You may need to change the oil more often

under dusty, dirty conditions. See "TO CHANGE ENGINE OIL" in the Mainte-

nance section of this manual.

ADD GASOLINE

Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel fresh- Bess.

Gasoline filler cap

TO STOP ENGINE

To stop engine, release operator pres- ence control bar.

TO START ENGINE

NOTE: Due to protective coatings on the engine, a small amount of smoke may be

present during the initial use of the product and should be considered normal.

NOTE: Your engine is equipped with an automatic choke system. No priming or choking is required before starting.

To start engine, hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back.

10

Page 10
Image 10
Craftsman 917.376402 owner manual Before Starting Engine

917.376402 specifications

The Craftsman 917.376402 is a noteworthy lawn mower that combines efficiency, robust construction, and user-friendly features for homeowners seeking a reliable solution for lawn care. Positioned within the Craftsman lineup, it stands out due to its blend of performance-oriented technologies and ergonomic design.

One of the main features of the Craftsman 917.376402 is its powerful engine. This model is typically equipped with a reliable Briggs & Stratton engine, providing ample horsepower to tackle various grass types and conditions. With its consistent performance, the engine ensures smooth operation, allowing users to mow through challenging terrains while maintaining a neat lawn.

Designed for versatility, the 917.376402 is a self-propelled mower, which simplifies the mowing process on inclines and uneven surfaces. The drive system allows for adjustable speed settings, enabling operators to control their pace according to their preferences or lawn conditions. This feature is particularly beneficial for those with larger yards or hilly landscapes.

Another standout characteristic is the cutting deck of the Craftsman 917.376402. It typically features a wide cutting width, often around 21 inches, which significantly reduces mowing time. The deck is engineered with multi-height adjustments, allowing users to customize their cutting heights based on varying grass types and desired aesthetics. Additionally, the mower's design promotes efficient grass dispersal, whether through side discharge, mulching, or bagging options, adding convenience to yard maintenance.

Safety is also a key consideration in the design of this mower. The Craftsman 917.376402 is commonly equipped with features such as a blade brake that stops the blades quickly when the handle is released, ensuring operator safety during operation. The comfortable grip of the handlebar enhances maneuverability and reduces fatigue during extended mowing sessions.

Moreover, the Craftsman brand is known for its commitment to durability. The 917.376402 is built with sturdy materials, ensuring longevity even with regular use. The mower's wheels are designed for stability and traction, providing a reliable grip on various terrains.

In summary, the Craftsman 917.376402 stands out as a robust and efficient lawn mower, perfect for homeowners looking to achieve a well-maintained lawn. With its powerful engine, self-propelled feature, adjustable cutting heights, and user-friendly safety mechanisms, it is crafted to deliver an exceptional mowing experience.