TROUBLESHOOTING - See appropriate section in manual unless directed
to a Sears Parts & Repair Center.
PROBLEM |
| CAUSE |
|
|
|
|
|
| CORRECTION |
|
|
|
| |||||||
Loss | of | power | 1. | Rear | of mower | housing or | 1. | Raise |
| cutting | height. |
| ||||||||
|
|
|
| blade |
| dragging | in grass. |
|
|
|
|
|
|
|
|
| ||||
|
|
| 2. | Cutting | too | much | grass. | 2. | Raise |
| cutting | height. |
| |||||||
|
|
| 3. | Dirty | air filter. |
|
|
| 3. | Clean/replace |
| air | filter. | |||||||
|
|
| 4. | Buildup | of |
| grass, | leaves, | 4. | Clean |
| underside |
| of | mower | |||||
|
|
|
| and | trash | under | mower. |
| housing. |
|
|
|
|
| ||||||
|
|
| 5. | Too | much | oil | in engine. | 5. | Check |
| oil | level. |
|
|
| |||||
|
|
| 6. | Walking | speed | too | fast. | 6. | Cut at slower | walking | speed. | |||||||||
Poor | cut | - | 1. | Worn, | bent | or | loose | blade. | 1. | Replace |
| blade. | Tighten | |||||||
uneven |
|
|
|
|
|
|
|
|
|
|
| blade | bolt. |
|
|
|
| |||
|
|
| 2. | Wheel | heights | uneven. | 2. | Set all |
| wheels |
| at same | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| height. |
|
|
|
|
|
|
|
|
|
| 3. | Buildup | of |
| grass, | leaves | 3. | Clean |
| underside |
| of |
| |||||
|
|
|
| and | trash | under | mower. |
| mower |
| housing. |
|
|
| ||||||
Excessive |
| 1. | Worn, | bent | or | loose | blade. | 1. | Replace |
| blade. | Tighten | ||||||||
vibration |
|
|
|
|
|
|
|
|
|
|
| blade | bolt. |
|
|
|
| |||
|
|
| 2. | Bent | engine | crankshaft. | 2. | Contact |
| a Sears | or other | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| qualified | service |
| center. | ||||
Starter rope hard to pull
,Engine flywheel brake is on when control bar is released.
,Bent engine crankshaft.
3.Blade adapter broken.
4.Blade dragging in grass.
1. | Depress | control | bar to | |||
| upper | handle before | ||||
| pulling |
| the | starter | rope. | |
2. | Contact |
| a Sears |
| or other | |
| qualified | service |
| center. | ||
3. | Replace | blade | adapter. | |||
4. | Move | lawn | mower | to cut | ||
| grass or to hard surface. | |||||
Grass | catcher | 1. | Cutting | height | too | low. | ||
not | filling | 2. | Lift on | blade | worn | off. | ||
(if | so | equipped) | 3. | Catcher | not venting | air. | ||
Hard | to push | 1. | Grass | is too | high | or | wheel | |
|
|
|
| height | is too | low. |
|
|
2.Rear of mower housing or blade dragging in grass.
3.Grass catcher too full.
4.Handle height position not right for you.
Loss | of | drive | 1. | Belt | wear. |
|
| |
or slowing | of | 2. | Belt | off | of | pulley. |
| |
drive | speed | 3. | Drive | cable | worn or | broken. | ||
|
|
| 4. | "Loose" | drive control | system. | ||
1. Raise cutting height. |
2.Replace blade.
3.Clean grass catcher.
1.Raise cutting height.
2.Raise rear of mower housing one (1) setting higher.
3.Empty grass catcher.
4.Adjust handle height to suit.
1.Check/replace drive belt.
2. Check/reinstall drive belt.
3.Replace drive cable.
4.Adjust drive control.
NEED MORE HELP?
You'll find the answer and more on managemyhome.com = for free!
•Find this and all your other product manuals online.
•Get answers from our team of home experts.
•Get a personalized maintenance plan for your home.
•Find information and tools to help with home projects.
brought to you by Sears
21
