PROBLEM
'7lowerstops
o If high current light stays on momedtarily after mower stops, load is too much for m_wer.
If low power light stays on, mower slows down, lhen stops.
CORRECTION
o Remove fuse and turn mower all its side. Make sure blade is free to rotate. Also check mower
fol clogging.
o Batteries may be low, near the need of charging. Recharge batteries,
o Grass may be too heaw for remaining battery capacity Try the following:
• Walk slower.
,, Reduce cutting width
o Raise mower cutting heigh'
3rass catcher
_ot filling
Hard to push
•Cutting height tO low
Lift on blade worn off. Ca'tche_not ve_tir_g air.
,,Grass is too high or wheel height is leo low.
•Rear of lawn mower housing or blade dragging
in grass.
•Grass catcher'too full,
•Handle heiglit position not right for you,
- Raise cutting height
•Replace blade.
•Clean grass catcher.
,, Raise cutting height.
',Raise rear of lawn mower housing one (1) setting higher
o Empty grass catcher
. Adjust handle height to suit
Mower | Does | Not | Operator presence control |
Stop when |
| bar is damaged. | |
Operator | Presence | . Start switch button sticks | |
| |||
Control | Bar | is | or damaged. |
Released |
|
|
,Replace operator presence control bar.
•Replace start switch button.
16