HOWTO SET UP YOUR LAWN MOWER
TO UNFOLD HANDLE
IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.
•Raise lower handle section to operating
position and squeeze the bottom ends of lower handle towards each other
until the pin in handle can be inserted
into one of the throe height adjustment holes.
•Remove protective padding, raise upper handle section into place on
lower handle and tighten both handle knobs.
•Remove any packing material from around control bar.
•Your handles may be adjusted for your mowing comfort. Refer to Service and
Adjustments section of this manual.
Operator
presence Control bar
handle
Liftup
Mowing
Lowerposi_on handle
Handle
pin
adjustment /bracket
TO INSTALL ATTACHMENTS
Your lawn mower was shipped ready to be used as a mulcher. To convert to
bagging or discharging, see =To convert moweP in the OPERATION section of thi,,
manual.
5
