HAZARD

ELECTRICAL
SHOCK
RISK TO FLUID
INJECTION
RISK OF CHEMICAL BURN
IP_;_
RISK OF HOT SURFACES
RISK OF INJURY AND
PROPERTY DAMAGE
WHEN
TRANSPORTING OR
STORING

WHAT CAN HAPPEN

• Spray directed at electrical outlets or
switches, or objects connected to an
electrical circuit, could result in a fatal
electrical shock.
Your washer operates at fluid pressures
and velocities high enough to penetrate
human and animal flesh, which could
result in amputation orother serious
injury. Leaks caused by loose fittings or
worn or damaged hoses can result in
injection injuries. DO NOT TREAT FLUID
INJECTION AS A SIMPLE CUT! See a
physician immediately!
Relieve system pressure before attempt-
ing maintenance ordisassembly of
equipment.
Use of acids, toxic or corrosive chemi-
cals, poisons, insecticides, or any kind of
flammable solvent with this product
could result in serious injury' or death.

HOW TO PREVENT IT

Unplug any electrically operated product
before attempting to clean it. Direct spray
away from electric outlets and switches.
Never place hands in front of nozzle.
Direct spray away from self and others.
Make sure hose and fittings are tightened
and ingood condition. Never hold onto
the hose or fittings during operation.
Do not allow hose to contact muffler.
Never attach or remove wand or hose
fittings while system is pressurized.
Use only hose and high pressure
accessories rated for pressure higher than
your pressure washer's p.s.i.
• To relieve system pressure, shut off engine,
turn off water supply, and pull gun trigger
until water stops flowing.
Do not use acids, gasoline, kerosene, or
any other flammable materials in this
product. Use only household detergents,
cleaners and degreasers recommended
for use in pressure washers.
• Wear protective clothing to protect
eyes and skin from contact with sprayed
materials.
• Contact with hot surfaces, such as
engines exhaust components, could
result in serious burn.
Fuel or oil can leak or spill and could
result in fire or breathing hazard, serious
mlury or death can result. Fuel or oil leaks
will damage carpet, paint or other
surfaces.
During operation, touch only the control
surfaces of the pressure washer. Keep
children away from the pressure washer
at alltimes. They may not be able to
recognize the hazards of this product.
If pressure washer is equipped with a fuel
shut-off valve, turn the valve to the off
position before transporting or storing to
avoid fuel leaks. If pressure washer is not
equipped with a fuel shut-off valve, drain the
fuel from tank before transporting or storing.
Only store fuel in an OSHA approved
container. Always place pressure washer on
a protective mat when transporting to
protect against damage to vehicle from
leaks. Remove pressure washer from vehicle
immediately upon arrival at your destination.
Do not store pressure washer inside build-
ings occupied by humans or pets.
ce_9o R_ 0 wls/ce 4-ENG