Pressure Washer Maintenance

Check and Clean Inlet Soreen: Examine inlet screen on pump inlet fitting. Clean if clogged; replace if torn.

Check High Pressure Hose: High pressure hose can develop leaks from wear, kinking, abuse. Inspect hose each time before use. Check for cuts, leaks, abrasions or bulging of cover, and damage or movement of couplings. If any of these conditions exist, replace hose immediately.

Check Chemical/Soap Hose and Air Filter: Examine the chemical/soap hose and clean if clogged. Hose should fit'tightlyon pump fitting. Check for leaks and tears. Replace filter or hose if either is damaged.

Check Gun and Wand for Leaks: Examine hose connection to gun making sure it is secure. Test trigger by pressing it and making sure it springs back into place when you release it.

Purge Pump of Air and Contaminants

To remove the air from the pump, follow these steps:

•Set up the pressure washer as described in Assembly section and connect the water supply.

•Remove the wand extension from the spray gun.

•Pull the trigger on the gun and hold.

To remove the contaminants from the pump, follow these steps:

•Set up the pressure washer as described in ASSEMBLY section, connect the water supply.

•Remove the wand extension from the spray gun.

•Start the engine according to instructions in the

OPERATION section.

•Pull the trigger on the gun and hold.

•When the water supply is steady and constant, disengage trigger and refasten the wand extension.

Engine Maintenance

Check Oil Level

•Oil level should be checked prior to each use

or at least every 5 hours of operation. To check oil see Engine Oil on page 9.

Change Engine Oil

•Change oll w_lle engine is still warm. Preferably drain oil from top of engine as illustrated below. Drain oil with air cleaner side up. Oil can be drained from engine bottom if necessary.

IMPORTANT: Before tipping engine or equipment to drain oil, drain fuel from tank by running engine until fuel tank is empty.

AIR CLEANER

•To drain oil from bottom of engine, remove drain plug as illustrated below. Allow oil to drain and

replace drain plug. Remove dipstick and refill with new oil of recommended grade. Start and run engine at idle for 30 seconds.

OIL DRAIN

PLUG

_8"SQUARE

PIPE

•Stop engine. Wait 30 seconds and re-check oil level. If required, add oil to bring level to FULL mark on dipstick.

12

Page 11 Page 13
Page 12
Image 12
Craftsman 919.76235 owner manual AIR Cleaner
Page 11 Page 13

919.76235 specifications

The Craftsman 919.76235 is a high-performance air compressor designed for both professional and DIY enthusiasts. This versatile machine stands out in the market due to its robust build quality, efficient operation, and user-friendly design.

One of the main features of the Craftsman 919.76235 is its powerful motor. With a horsepower rating that drives a reliable pump, this air compressor is capable of delivering a consistent airflow that can handle a wide range of tasks, from inflating tires to powering pneumatic tools. The compressor has a substantial tank capacity, which allows for extended usage without frequent refilling, a significant advantage for those who require continuous air supply for their projects.

This air compressor operates at a maximum pressure of 135 PSI, which is suitable for most home and professional applications. The quick recovery time ensures that the compressor is back up to pressure shortly after pressure drops, allowing for uninterrupted work. The compressor also features a gauge that provides real-time feedback on the air pressure, enabling users to monitor their operations effectively.

Another standout characteristic is its portability. The Craftsman 919.76235 is designed with built-in wheels and a handle, making it easy to transport from one job site to another. This feature is particularly beneficial for contractors who work in various locations or for users who may need to move the unit around their workshop.

In terms of safety and maintenance, the Craftsman 919.76235 incorporates several thoughtful features. An automatic shut-off function prevents the compressor from over-pressurizing, which can lead to potential hazards. Additionally, the oil-free pump design means that users do not need to worry about regular oil changes, significantly reducing maintenance requirements and enhancing the machine's overall reliability.

The Craftsman 919.76235 is compatible with a variety of air tools, making it an excellent investment for both home use and professional applications. Whether it involves painting, nailing, or using impact wrenches, this air compressor meets diverse needs with ease.

In conclusion, the Craftsman 919.76235 air compressor delivers an impressive array of features, including a powerful motor, high maximum pressure, portability, and user-friendly operation. Its design prioritizes both efficiency and safety, making it an ideal choice for those seeking a dependable and versatile air compressor for various tasks.
Top Page Image Contents