Safety Symbols
The information listed belowshould be read andunderstood by the operator.This information is given to protectthe
u_er while operating and storing the air compressor. We util_e the symbols belowto allowthe readerto recognize
imeortant infermation about their safety
Indicates an imminentty hazardous situation which, if
net avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, ifnet
avoided, could result in death or serious injury,
Indicates a potentially hazardous situation which, ifnot
avoided, may result in minor or moderate injury.
When used without thesafety alert symbol indicates
a potentialiy hazardous s[tu_L_enwinch,if notavoided,
may result in property damage,

Important Safety Instructions and Guidelines

•Save all instructions
Improper operation or maintenance of this product could result in serious injury and/or property damage. Read and
understand all of the warnings and safety instructions provided before using this equipment.
Risk of Moving Parts
Risk of Burns

Risk of Falling

i

Risk from Flying Objects

The air compressor should be operated on a dedicated 15amp circuit. Ifthe circuit
does not have 15free amps available, a larger circuit mustbe used. Always use
more air hose beiore utilizing extension cords. A!l extension cords used mustbe 12
gauge with a maximum length ol 25 ft.The circuit fuse type must be a time delay Low
voltage could causedamage tothe motor.
If the aircompressor is in operation, all guards and covers should be attached or
installed correctly. If any guard or cover has been damaged, do not operate the
equipment until the proper personnel has correctly repaired the equipment. The power
cord should be free ef any moving parts, twisting and!or crimping while in use and
while in storage.
There are sudaces on your air compressor that while in operation and thereafter can
cause serious burns if touched. The equipment should be allowed time to cool before
any maintenance is attempted Items such as the compressor pump and the outlet
tube ere normally hot during and after operation.
Operation ot the air compressor should alwaysbe ina position thatis stable. Never
use the air compressor on arooftop orelevated positionthat could allow the unit to fal!
or be tipped over. Use additional air hose for elevated jobs.
Always wear ANSI Z87.1 approved safety glasses withside shields when the air
compressor isin use. Turn off the air compressor and drainthe air tank before
performing any type of maintenance or disassembly of the hoses or fittings. Never
point any nozzle or sprayer toward any part of the bodyor at otherpeople or animals.