TROUBLESHOOTING

This section addresses minor service issues. To locate the nearest Sears Service Center or to schedule service, simply contact Sears at

www.sears.ca.

Problem

 

Cause

 

Remedy

 

 

 

 

 

Engine fails to start

1.

Choke not in ON position.

1.

Move choke to ON position.

 

2.

Spark plug wire disconnected.

2.

Connect wire to spark plug.

 

3.

Fuel tank empty or stale fuel.

3.

Fill tank with clean, fresh gasoline.

 

4.

Engine not primed.

4.

Prime engine as instructed in

 

 

 

 

“Operating Your Snow Thrower”.

 

5.

Faulty spark plug.

5.

Clean, adjust gap, or replace.

 

 

 

 

6.

Blocked fuel line.

6.

Clean fuel line.

 

 

 

 

7.

Safety key not in ignition on engine.

7.

Insert key fully into the switch.

 

 

 

 

8.

Fuel shut-ff valve closed. (If Equipped)

8.

Open fuel shut-off valve.

 

 

 

 

 

 

 

 

Engine runs erratic

1.

Unit running on CHOKE.

1.

Move choke lever to OFF position.

 

2.

Blocked fuel line or stale fuel.

2.

Clean fuel line; fill tank with clean,

 

 

 

 

fresh gasoline.

 

3.

Water or dirt in fuel system.

3.

Drain fuel tank. Refill with

 

 

 

 

fresh fuel.

 

4.

Carburetor out of adjustment.

4.

Contact Service Center.

 

 

 

 

 

Engine overheats

1.

Carburetor not adjusted properly.

1.

Contact Service Center.

 

 

 

 

 

Excessive

1.

Loose parts or damaged auger.

1.

Stop engine immediately and

Vibration

 

 

 

disconnect spark plug wire. Tighten

 

 

 

 

all bolts and nuts. If vibration

 

 

 

 

continues, have unit serviced by a

 

 

 

 

Service Center.

 

 

 

 

 

Loss of power

1.

Spark plug wire loose.

1.

Connect and tighten spark plug

 

 

 

 

wire.

 

2.

Gas cap vent plugged.

2.

Remove ice and snow from gas

 

 

 

 

cap. Be certain vent is clear.

 

3.

Exhaust port plugged.

3.

Contact Service Center.

 

 

 

 

 

Unit fails

1.

Drive control cable in need of adjust-

1.

Adjust drive control cable. Refer to

to propel itself

 

ment.

 

“Adjustments”.

 

2.

Drive belt loose or damaged.

2.

Replace drive belt.

 

3.

Friction wheel worn.

3.

Replace friciton wheel.

 

 

 

 

 

Unit fails

1.

Chute assembly clogged.

1.

Stop engine immediately and

to discharge snow

 

 

 

disconnect spark plug wire. Clean

 

 

 

 

chute assembly and inside of

 

 

 

 

auger housing with clean-out tool

 

 

 

 

or a stick.

 

2.

Foreign object lodged in auger.

2.

Stop engine immediately and

 

 

 

 

disconnect spark plug wire.

 

 

 

 

Remove object from auger with

 

 

 

 

clean-out tool or a stick.

 

3.

Auger control cable in need of adjust-

3.

Refer to “Auger Control Test” .

 

 

ment.

 

 

 

4.

Auger belt loose or damaged.

4.

Refer to Maintenance section.

 

5.

Shear pin(s) sheared.

5.

Replace with new shear pin(s).

 

 

 

 

 

22

Page 22
Image 22
Craftsman C459-52833 manual Troubleshooting

C459-52833 specifications

The Craftsman C459-52833 is a versatile and powerful tool that caters to the needs of both professionals and hobbyists. This tool is designed with a variety of features that enhance its usability and performance, making it an essential addition to any workshop or garage.

One of the standout features of the Craftsman C459-52833 is its robust construction. Built from high-quality materials, it ensures durability and longevity, allowing users to tackle a wide range of projects without worrying about wear and tear. The ergonomic design is another significant aspect, offering a comfortable grip that minimizes fatigue during extended use. This is particularly important for those engaging in lengthy crafting sessions or demanding tasks.

Another key characteristic of the Craftsman C459-52833 is its impressive power output. Equipped with a high-torque motor, it delivers optimal performance for various applications. This power allows users to handle tough materials easily, whether it’s wood, metal, or plastic. The adjustable speed settings further enhance its versatility, enabling users to select the appropriate speed for each specific task, thus achieving precise results.

The Craftsman C459-52833 also incorporates advanced technologies that improve its performance and ease of use. For example, it features a user-friendly interface that provides clear indicators and controls, making it accessible for beginners and experts alike. The integrated safety features, such as overload protection and an automatic shut-off mechanism, ensure safe operation, reducing the risk of accidents during usage.

In terms of versatility, the Craftsman C459-52833 supports a wide range of attachments and accessories, allowing users to customize their experience further. This adaptability makes it suitable for various applications, from detailed craftwork to heavy-duty repairs.

Furthermore, the portability of the Craftsman C459-52833 adds to its appeal. Its lightweight design and compact size make it easy to transport, enabling users to bring it to job sites or different areas of their workspace without hassle.

In summary, the Craftsman C459-52833 stands out with its robust construction, powerful motor, adjustable speed settings, and safety features. Ideal for both professionals and DIY enthusiasts, this tool combines performance, versatility, and ease of use, making it an invaluable asset in any toolkit. Whether you’re embarking on a large project or tackling everyday repairs, the Craftsman C459-52833 is poised to deliver the results you need with efficiency and reliability.