GETTING TO KNOW YOUR HAND VACUUM
12
Debris Screen | HEPA Filter |
|
|
| 11 |
|
|
| 5 |
|
| ||
|
|
|
|
| 11 |
1. | Dust Cup Release Button | 7. | Shoulder Strap | ||
2. | On/Off Power Switch | 8. | Pet Hair Removal Attachment | ||
3. | Handle |
| 9. | Cleaning Brush | |
4. | 10. | Flexible Hose | |||
5. | Dust Cup (Container) | 11. | Hepa Filter Assembly | ||
6. | Suction Hole |
| 12. | Air Driven Turbo Brush | |
Technical Specifications
Voltage: | 120V., 60Hz. |
Power: | 6.67 A., 800 Watts |
2
TROUBLE SHOOTING GUIDE
PROBLEM |
| POSSIBLE REASON | POSSIBLE SOLUTION | ||
|
|
|
|
| |
| 1. | Power cord not firmly plugged | 1. | Plug unit in firmly. | |
| 2. | Check fuse or breaker. | |||
HAND VACUUM |
| into outlet. | |||
|
| Replace fuse/reset breaker. | |||
WILL NOT | 2. | No power in wall outlet. |
| ||
3. | Call | ||||
OPERATE | 3. | Needs servicing. | |||
4. | Turn the unit off and unplug | ||||
| 4. | Thermostat has tripped. | |||
|
| from outlet. Allow to cool. | |||
|
|
|
| ||
|
|
|
|
| |
|
|
| 1. | Empty dust cup – | |
|
|
| 2. | (see pages 5/6). | |
HAND VACUUM | 1. | Dust cup is full. | Turn unit off and unplug | ||
| from wall outlet. Remove | ||||
WILL NOT | 2. | Unit clogged. |
| HEPA Dust Cup Filter and | |
OR SUCTION | 3. | HEPA Dust Cup Filter needs |
| check for object(s) in air | |
POWER IS WEAK |
| cleaning or replacing. | 3. | duct and remove. | |
|
|
| Clean or replace HEPA | ||
|
|
|
| Dust Cup Filter. | |
|
|
|
| (see pages 5/6) | |
|
|
|
|
| |
TURBO BRUSH | 1. | Rotating brush or elbow | 1. | Clear obstructions. (see | |
DOES NOT |
| page 5.) | |||
| obstructed. |
| |||
ROTATE OR |
| 2. | Clear obstruction. | ||
2. | Hose obstructed. | ||||
ROTATES | 3. Clean HEPA dust cup filter. | ||||
3. | HEPA dust cup filter clogged. | ||||
SLOWLY |
| (See pages 5/6.) | |||
|
|
| |||
|
|
|
|
| |
| 1. | Dust cup is full. | 1. | Empty dust cup. | |
| 2. | Review HEPA Dust Cup | |||
DUST ESCAPING | 2. | HEPA Dust Cup Filter is not | |||
| Filter instructions. | ||||
FROM HAND |
| installed correctly. |
| ||
|
| (see pages 5/6) | |||
VACUUM | 3. | There is a puncture/hole in |
| ||
3. | Replace HEPA dust cup | ||||
|
| HEPA Dust Cup Filter. | |||
|
|
| filter. (see pages 5/6) | ||
|
|
|
| ||
|
|
|
|
| |
HAND VACUUM | 1. | Hose clogged. | 1. | Remove hose and/or | |
HOSE OR |
| bushes. Remove obstruction | |||
BRUSHES WILL | 2. | Dust cup is full. |
| from hose. | |
NOT |
|
| 2. Empty and clean dust cup. | ||
ORDERING REPLACEMENT DUST CUP FILTERS
TO ORDER REPLACEMENT FILTERS OR FOR TECHNICAL
SUPPORT
for Model EP035H3
Call:
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note: After each Use - Always remove the Filter Debris Screen from the HEPA Dust Cup Filter, then vigorously “TapClean” HEPA Filter until no more dust can be removed. Filter should be rinsed and completely dried at least once a month or when suction appears reduced.
To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse under a tap until all observable dirt has been removed. Some discoloration of the HEPA filter material may occur, this is normal and will not affect the filter's performance. When finished, shake off excess water. Do NOT wash in dishwasher. It is important that when you wash the HEPA dust cup filter, you allow it to dry COMPLETELY before using again. We recommend 24 hours to air dry. DO NOT DRY IN DRYER.
7
