Craftsman 919.769060, D25852 owner manual Risk of HOT Surfaces, Destination

HAZARD

RISK OF HOT SURFACES

WHAT CAN HAPPEN	HOW TO PREVENT IT
• Contact with hot surfaces, such as	• During operation, touch only the control
engines exhaust components, could	surfaces of the pressure washer. Keep
result in serious burn.	children away from the pressure washer
	at all times. They may not be able to
	recognize the hazards of this product.

HAZARD

RISK OF INJURY AND PROPERTY

DAMAGE WHEN TRANSPORTING

OR STORING

WHAT CAN HAPPEN	HOW TO PREVENT IT
• Fuel or oil can leak or spill and could	• If pressure washer is equipped with a
result in fire or breathing hazard, serious	fuel shut-off valve, turn the valve to the
injury or death can result. Fuel or oil	off position before transporting to avoid
leaks will damage carpet, paint or other	fuel leaks. If pressure washer is not
surfaces in vehicles or trailers.	equipped with a fuel shut-off valve, drain
	the fuel from tank before transporting.
	Only transport fuel in an OSHA approved
	container. Always place pressure washer
	on a protective mat when transporting to
	protect against damage to vehicle from
	leaks. Remove pressure washer from
	vehicle immediately upon arrival at your
	destination.

The powerful spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint,

auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. Avoid the use of the concentrated spray stream except for very strong surfaces like concrete and steel.

Operating without flow of water will result in equipment damage. Operating the pressure washer with water supply shutoff will void your warranty. You should never run this pressure washer for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit.

7- ENG D25852