LATITUDE LARGE MEDIA STAND
C
A
Back
Panel
Divider
Panel
B 
D
Left | Back |
Side | Panel |
Panel |
|
Divider
Panel
5A. Insert 4 wood dowels into the outer holes on edges of each back panel.
B. Insert 4 cams into each back panel, making sure arrows on cams points towards nearest edge.
C. Insert 6 wood dowels into outer holes on edge of divider panels.
D. Insert 2 cam screws into the inner holes at the rear of each divider panel.
7A. Insert 4 wood dowels into the outer holes on the edges of the middle back panel.
B. Fit middle back panel onto cam screws of each divider panel. Secure all 4 cams with a phillips head screwdriver.
Made in Denmark - r09
6Fit left side and divider panel onto back panel, aligning cam screws and dowels with corresponding holes. Using a phillips head screwdriver, turn all 4 cams on the back panel clockwise until each cam tightly engages the cam screw. Repeat for remaining right side, back and divider panel.
8With the assistance of another adult, carefully lift each back panel assembly and place into position on bottom panel. Make sure dowels and cam screws on each panel are aligned with their corresponding holes.
Page 3 of 5
Customer Service