LATITUDE LARGE MEDIA STAND
A
B
13A. Fit cup of 2 door hinges into large holes on both door interiors. Secure each with 2 hinge screws per hinge.
B. Attach 1 door pull handle to each door front with 2 pull standoffs and 2 pull screws as shown.
A
B
14A. Fit each door hinge onto the case hinge installed on the side panels. Temporarily secure the set screw with a screwdriver and refer to the instructions below for final adjustment of the door and hinges.
B. Conceal all exposed cams with cam covers. Assembly is now complete.
HINGE ADJUSTMENT
If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.
A
B
1
1)Side to side adjustment: Loosen screw A, adjust gap with screw B and
A 
B
2
2)Depth adjustment:
Loosen screw A, push hinge arm forwards or backwards,
C
C
3
3)Height adjustment: Loosen screw C, adjust door height and re- tighten screw C.
Made in Denmark - r09
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
Page 5 of 5
Customer Service