LATITUDE LARGE MEDIA STAND
Cam in | Cam in |
unlocked | locked |
position | position |
9Using a phillips head screwdriver, turn each cam at the base of the side panels clockwise until each cam tightly engages the cam screw.
10Insert 12 shelf pins into the holes in the side and divider panels at desired shelf heights.
11Fit 2 side shelves and 1 middle shelf into position. Make sure each shelf is securely supported by the shelf pins.
Made in Denmark - r09
A
B
12A. With the assistance of another adult, fit cam screws of the top panel into corresponding holes in the side and divider panels. Secure all 12 cams by turning clockwise with a screwdriver.
B. Adhere 2 door stops to the front edge of each shelf as shown.
Page 4 of 5
Customer Service